1912 Excelsior Tribute

[MotoMagz]

So... I am very happy with the Bike. It is a cruiser for sure! But don’t be fooled kids this thang is quick.
After a few short rides it was time to go over the bike.I lost 2 seat spring bolts,remove a few belt links and turn up idle! Done and back riding! Happy Fathers Day ! Video this week!

 

[curtisfox]

Bet you are happy with the results, always nice to be able to ride without a bunch of redoing, fixing, pays to take your time..........Happy Father’s Day..........Curt

 

[MotoMagz]

Thanks Curt! Yep I did for once take my time ! Goes to show you how well locktite and lock washers work.... the only 2 nut that fell off didn’t either one. For those who might be afraid to open up the engine, don’t be. My first ever interior work in a engine besides govner removals and springs. I installed new milled head , 22lb springs ,mod cam,billet rod. And billet flywheel with 32 degree timing. Carb is a Pz22 by Deni all it needed was idle turned up. The adjustable belt has been very helpful..being able to remove a link is a lot better than having to buy new belts or use a tensioner. Plus you don’t have to remove your wheel or clutch .

 

[Tom from Rubicon]

Please, please more pitchers please

 

[indian22]

Please, please more pitchers please

Yep, pictures rock Tom. They're especially useful and entertaining on the more complex builds.

Rick C.

 

[MotoMagz]

I will get some pictures of bike in a few days. Until then I’m hoping to find time to hook up my taillights and head light....

 

[Velodrome]

BOOOOoooOOOoo NO PICTURES !!!! BOOOOOOoooOOoo

 

[Tom from Rubicon]

Better do something Moto, O'l Velo is getting agitated. The fact that our weather is getting sort of seasonal is good reason though for you to remain off our radar.
Tom

 

[MotoMagz]

I’m feeling the pressure! Velo is not happy he sent 90 degree weather my way...geez. I hope these pics of the light get me a week of time to get some real ones up! 12v 2600mah with a 3x 900ma driver. This setup will get about 3 hrs of run time with out the bulk.

 

[Tom from Rubicon]

Three hours run time, pretty good duration out of a hand full.
Tom

 

[MotoMagz]

I bought some bulk cable housing and it’s failing! P meoff! Have to reduce my cables now.

 

[indian22]

I bought some bulk cable housing and it’s failing! P meoff! Have to reduce my cables now.

Dang that sucks!

Rick C.

 

[Tom from Rubicon]

Us geniuses around here would like to see the application of said failure that P**'s you off Moto.
Then again maybe I am just speaking for myself.
But troubles always advance the learning curve of all that view your thread and everyone elses that over come engineering obstacles.
On the electrical side of you machine. I guess I was looking at the wrong power packs. The 12V Li ion are huge compared to the NiCad you sourced.
Thanks for the update.
Tom

 

[MotoMagz]

Hey Tom , the cable housing was on my reverse levers and drum brakes. They pull good ...to good for overseas components! Inner metal pulled right through Housing and end cap.

Took her out for a ride a few minutes ago. Still need to remove a few belt links so I can see what she’s got.Took a few pictures too.....

 

[Velodrome]

OOOHHH YA! Thems the sexy shots I been needing! Gonna add any pinstriping?

 

[Tom from Rubicon]

Those Bullhorn levers have more power and throw than I expected Moto. Thanks for sharing the great photos of your machine. In my eyes your Excelsior is a master piece.
Tom

 

[RocketJ]

That looks absolutely amazing. Great job. I hope my bike looks half as good as yours.

 

[indian22]

Hey Tom , the cable housing was on my reverse levers and drum brakes. They pull good ...to good for overseas components! Inner metal pulled right through Housing and end cap.

Took her out for a ride a few minutes ago. Still need to remove a few belt links so I can see what she’s got.Took a few pictures too.....

Super well crafted beauty! I am certain it's fun to ride & it's great to look at.

Rick C.

 

[fasteddy]

Absolutely has everything a well crafted period build should have and it's done to perfection.

I hope you are able to overcome the cable problems.

Steve.

 

[Mark Murphy]

My lord, that is very nice, you should win trophy's with that.