Spy Pics of Team BoXer's full suspension race bike!

I know I've been out of the loop for awhile but I've never seen a manifold/carborator setup remotely like this. Could you please tell me what is going on? That bike is just plain cool! How do these engines hold up to off road use? When MK was still active we were all doing cruisers and such, you guys have some really adventurus projects here. My hats off to all of you...Kelly
 
It's walbro carb and a reed cage with carbon fiber reed. We made a few of them for R&D purposes and now that they really work, I think they are ready for production. Coming soon the kit will have the reed cage, piston and carb.
 
HI,

Nice bike!....One thing that might be helpful for a production run would be to angle the carb off to the side...Many bikes may not have a lot of clearance between the carb and the
the seat tube as it is.
Again....Nice work
Andrew
 
Oh....I like the bike...What brand is it or was it?...did you have to do alot of mods to get
then engine in?

Thanks

Andrew
 
The stuff on my chin? It's drool...........:D

So how much would just the carb cost me?

GREAT BIKE!!!
 
Good job, it is hard to make a full suspension bike. One of the hard parts is to have the swing arm in the correct position, you did it. Looks like it will move like the wind. Have fun, Dave
 
...Many bikes may not have a lot of clearance between the carb and the
the seat tube as it is.
Again....Nice work
Andrew

Andrew, I measured the carb and reed cage/manifild and is a total of 3 1/2 inches. We plan on just making a custom velocity stack/air cleaner.
 
I know I've been out of the loop for awhile but I've never seen a manifold/carborator setup remotely like this. Could you please tell me what is going on? That bike is just plain cool! How do these engines hold up to off road use? When MK was still active we were all doing cruisers and such, you guys have some really adventurus projects here. My hats off to all of you...Kelly


Thanks but all the credit and long hours belong to Dean from BoXer.
Here's a picture of the reed cage minus the carbon fiber reed.


 
That is really cool. How much does this setup enhance preformance? Can you post a link to a website where I can read more on this mod? I'm very interested in this mod for both prefomance and astedic reasons. Thanks in advance...Kelly
 
I'm not going to lie to you guys but we are a bunch of lod school guys and are really good at checking out forums. But I will take a video of the bike during acceleration.
 
Prices on the carb only? The carbs alone are around $60 "on the net" without the manifold but you need to do a few easy mods to get them to work. pulse line and linkage(which I'll be happy to show you)

Pockbikesunlimited sells a carb kit for $122.
 
Thank you. I think my main road to better running and performance will be a new carb.
 
What brand is it or was it?...did you have to do alot of mods to get
then engine in?

Thanks

Andrew


Andrew, I found this picture. It was the first proto-type set-up before Dean got the beast where it is today. Can you see the difference?

BEFORE

AFTER
 
Last edited:
Nice Real Nice!!!!!! I got to stop lookings at that I got drool all over the key board and I'm afraid I'll short out something.
 
Last edited:
Back
Top