Check out my blog over at Red Rock Cycles.com for an easy solution to convert your NT carb choke to a thumb choke. and as always...Ride the Breeze™
Cheech Reed
Cheech Reed
NT Carb Thumb Choke
- Thread starter Cheech
- Start date
-
- Tags
- carb choke lever
I did something very much like yours on my first bike. I used 1/4" stainless tubing mounted under the top bar to route the cable and flared the end so the spring could be threaded on making the tension adjustable. I use the old front derailer thumb shifter on the handlebars to operate the choke.
Great idea, Cheech. Thanks for sharing it with us.
Tom
Great idea, Cheech. Thanks for sharing it with us.
Tom
Attachments
This is a much better solution than fumbling around under the seat. My bike has the same method as 2door, but the redrock cycles idea seems more universal.
Good job, a friend and I were talking about doing the same mod on our bikes. The choke lever on the handle bar is a safety improvement, the cns carb on my first bike has this. I have asked from the first time I saw the nt why was the lever on the right side of the carb, I don't think they have the throttle on the left side of the bars.
