CulverCityClassic "Dyno" 99cc Build

[wolf-jr]

We're do you get your small pedal side sprocket ?

That must be a take-off part from a Walmart Huffy...

 

[scotto-]

That must be a take-off part from a Walmart Huffy...

Awe yah man......dats weere i gits me from 2.......furgot mannn. Hoofy partz r kewl....dems fazt est !

 

[ocho ninja]

Oh really dem parts of a freggin huffy, kewl....

 

[headtrama]

Picture a day: made spacers on my dmb lathe, got stuff lined up. Got my clutch today. Dang I got a free Sunday, the only thing in my way is a hang-over... Then again I may ride....

looks good Jeff, counter sink those sprocket bolts unless those are just mock up bolts in there for now. I am waiting to see this thing run to see if I want to switch my cruiser over to a four stroke .

 

[culvercityclassic]

Picture of the day: got my brake set-up on the rear completed. Hub and sprocket spacers completed.

Added a pulse fitting to the in-take for the fuel pump, made gaskets for the in-take and carb.

I have been put on notice from the gf...dmb help...Andy help....

 

[headtrama]

Picture of the day: got my brake set-up on the rear completed. Hub and sprocket spacers completed.

Added a pulse fitting to the in-take for the fuel pump, made gaskets for the in-take and carb.

I have been put on notice from the gf...dmb help...Andy help....

Oh no that's not a good a good thing when your put on notice .

 

[dmb]

sorry bud, but like rat's on a sinking ship your on your own.''**** has no fury like a women scorned'' J.C. Christ wrote that along time ago... still pretty much rings true today. i'm not sighning on this one bro, NEIL

 

[racie35]

todays pics are late........lol

 

[culvercityclassic]

Today's pictures: moved the motor down over an inch, made sure the jackshaft and chain worked out. Looks better. Pulled the motor and removed the governor. Drilled and tapped the side cover for a oil fill and vent. Cam was removed and will get re-ground... By Isky...

This bike has become a lot of work. But it will be worth it...

 

[scotto-]

That's one big tap. Lookin' good Bro, keep inspiring me as I'm finally starting on my 99

 

[dmb]

how cool is that! the old man [the camfather] is as sharp as ever. priceless pic. any thoughts on the rod? dennis

 

[culvercityclassic]

Picture of the night: got the side cover to accept a fitting for the vent/oil fill, good luck to anyone trying to complete this cuz it was a b-tch. Vented custom cap. The case was tapped and plugged.

The cam was re-ground now the worry is the rod.... It looks like the weak link.... No 7500 rpm runs.

 

[scotto-]

Nice Hefe! I started my 99cc today for the first time to see if and how it runs before tearing down and cleaning it out. Ran it for 5mins. and it runs like a champ. Let the build begin! Some pics from today......

I'll be starting a thread on the build soon enuf.......can't wait!

EDIT: dmb Dennis, this engine is going on the "not to be blue much longer" Dyno that you gave me, thank you very much bro, yer gonna like it!

 

[dmb]

hey bro! looks like you stole a zommie off a sbc. dont start a fire! dennis

 

[racie35]

where did you get that zoomie Scotto? make it?

 

[headtrama]

It looks like a heated foot rest to me nice .........

 

[scotto-]

I call it the "flame thrower"! It's just a flange w/1" stuck in it.....it will grow from there and will hopefully be kinda quiet for street use. That's the plan anyway.

Now back to Jeff's work of art and craftsmanship......

 

[Venice Motor Bikes]

I have to be honest... You guys really make me want one of these monster bikes too!

 

[culvercityclassic]

Picture of the day: made the chain tensioner for the ped side...looked over some other items that need to be addressed. Called it an early nite to kiss some booty....

 

[racie35]

is that tire 26x3?