clutch

Hello everybody, I'm pretty new in this community so please don't blame me too much :D So let's get started with the problems: When i start my engine and i pull in my clutch i start hearing some fast banging noise(not really sure how to call it) coming from the clutch plate side. And when I...

My bike won't start, and when the clutch is engaged or disengaged the gear ALWAYS spins freely, why is this? And how can i fix it? Urgent matter please help soon

Is there a way of making the clutch/clutch lever operate like a normal motorcycle clutch i.e. pull in to disengage and let out to engage? Thx

I am looking for a primary drive reduction for the 79cc Predator. I am finding some that have a plate that bolts to the engine around the 5/8" output shaft but do not know which ones are more reliable. Is the Max-Torque clutch the one to get? I am seeing several others, some that are tuneable...

I have a problem in my clutch and I do not know what type and version it is, I need to know to buy a new one, could someone help me find out what it is? I only know that my engine is 4-stroke

Hey guys new to this Had my bike for 2 days and decided to start taking things apart just to check on them and see how it works ( i know now that this was not a good idea) long story short i cannot get the plate that holds the pin that pushes the bucking bar and accuator bearing to close, i was...

My chain broke I'm in the process of installing a new one how do I get the chain off the clutch sprocket help please!

The bucking bar on my bike was bad. Being a novice machinst I need to know the length and diameter of the bar so I can make it. The bar tends to have a lose fit so I am just looking for a ballpark figure for a standard 2 stroke engine.

I have an 80cc engine on my bike. Well about a week ago I was on a beautiful ride. I came up to a park that only had one path and got behind a maintenance golf cart. He was putting along pretty slow. So I cut through the grass and beat him around the corner. I rode out of the park and made it to...

Hey guys I have a quick ? I have an 80cc flying horse with 5 tanks ran through it. Recently I noticed my actuator arm wasnt releasing its self. Could this be due to the shaft of the arm wearing down? Thanks....

Hi All, I have a 2 stroke 80cc motor attached to a huffy cruiser. Everything works fine for the most part until tonight. I had biked home and needed to head out again, so I pulled my clutch down, and started to walk the bike and it was very hard. I had hopped on the bike and began to...

I'm not sure what the problem is here. When holding the clutch lever the chain spins freely as it should, but when I let it go to start the engine, it completely locks and I can't pedal or spin it at all. The engine is brand new, I've never started it. This is my first, so any help is appreciated.

I have a motorized 2 stroke from bikeberry, and the clutch on it used to be totally fine! Once I decided to remove the clutch cover, and gear cover, I decided to re- assemble everything back together. I noticed that after I put the ball bearing, and bucking bar back in, it stuck out way to far...

So I was riding my motorized bike, testing it after trying to fix some nasty 4-stroking, when the clutch arm popped out. Like the whole L shaped piece that goes into the engine just came out and I can't just slide it back into the hole it came out of.... it won't go all the way in. Now what...

The balls fell out from my clutch bearing so i have ordered a new one. I will get them tomorrow. But do you know if there are some better types of clutch bearing i could replace to? Have it happened to you that that some balls just falls off?

Hey guys, Im new posting here but a long time lurker. I have built a fat tire motor bike but have difficulties with getting it to actually go with me on it. I am large in stature but low in weight (6'4" @ 170lbs) I have posted many pictures of the build plus added a question in this forum...

Hey! I am building a fat tire (mongoose dolomite) custom frame and gas tank bike. My mandatory specs were that it had to have disc brakes front and rear, 4 stroke motor, and shift with no manual clutch (shifter kit from Bike Berry). The problem I am having seems to be that the 49cc motor (also...

So I was looking around the other day and I came across this DIY 2 speed dog clutch: http://www.thepixelpump.com/widdershins/how-to-2speed-transmission.php Here's a closeup: http://www.thepixelpump.com/widdershins/images/gearbox-2.jpg It looks like a useful (and cool) thing to add to my...

Hey guys, I have a problem with my brand new 80cc kit, the clutch pin is sticking out. I can put the case with the clutch arm back on again but when i try to engage the clutch it wont let the drive sprocket turn. It looks like this: https://www.youtube.com/watch?v=B6MclEe29gM I...

I've replaced the springs on the clutch twice, can't seem to locate a new flyweight anywhere. I have a 4stroke pull start from bikeberry, and they are out of stock. Does anyone know of any options I might have? The dust from the clutch pads go in to the transmission and cause it to lock up. Can...