Per Mr Google’s Chinese translation, my forks have arrived in San Francisco
Cranbrook Springer Forked BTR YD100 Replica Build (without fabrication)
- Thread starter Nightster
- Start date
While I’m waiting on parts I’m also playing around with a little copper accenting.
Attachments
Does anyone have any experience mounting their gas tank with leather straps? Considering this...
could I weld some footman loops to my frame or my tank and wrap a leather belt through in two places?
could I weld some footman loops to my frame or my tank and wrap a leather belt through in two places?
Attachments
So I have a little problem. The final nut only threads in until it bottoms out. Can I cut about 3/4” of the threads off? Or is there a different nut I can use?
forks look great and the quality seems pretty good.
forks look great and the quality seems pretty good.
Attachments
Yes you can, but wait till you are almost done just in case you need room for head light bracket, or the like there is also a small jam nut you can put under it to hold all together till then.........Curt
I’m also having trouble with the crown race. I was able to get it off the old forks without any trouble, it’s not going on the new forks.
i’ve tried everything including a pipe just the right size to hammer on it but it’s not going on.
suggestions???
i’ve tried everything including a pipe just the right size to hammer on it but it’s not going on.
suggestions???
OD of steering tube where the crown race presses on is 27mm
ID of Crown race is 26.7mm
can I file one of them down a bit ?
ID of Crown race is 26.7mm
can I file one of them down a bit ?
Don’t se why not, but race my hard steel and have to use dremmel and stone on it.......Curt
Ok crown race installed.
with these forks being a little taller,I may increase upward the slot where the axle bolts on. That could buy me another 1/3 to 1/2”
with these forks being a little taller,I may increase upward the slot where the axle bolts on. That could buy me another 1/3 to 1/2”
Attachments
Looking good Danny, the tank is so right. Hopefully Pete from the UK will give his thoughts on #363.
Follow him and he will likely follow you.
Tom
Follow him and he will likely follow you.
Tom
Pete be the dude when artistic detail and practical mechanics converge.
Tom
Tom
Picked this up locally for $40 today. Future build out of this huffy deluxe
Attachments
Danny, someone should have warned you about what happens when you build the first bike but it's too late now.
Steve.
Steve.
