supercycle 7500

Discussion in 'Introduce Yourself' started by andrewg225, Sep 10, 2009.

  1. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    Hey everone my name is andrew and i'd like to share with you my experince with my moterized bike .
    Well first off when i decovered that there was a such a thing as one i wanted one . i started working at a bikeshop and i was orgainizeing all the invotory and used bikes there was over 400 bike in this guys basment at his store it was crazy all different types mostly really old ones .. gold mine as he called it . well i seen that moterized bike i thought now that is really cool i want it after a 2 weeks pay i bought it for 150 all is needed was a cables tires and barings so that 150$$ turned in to 200i thought i couled live with that then more stuff went on it the breather cracked and the throttle cable went then i lost the little baring in the clucth .. lol just little things that piss you off .. . i slightly motifided the muffer so is goes unger my bottom bracket . then my top jug blows just after i get a new chain and chain tensher so that brings me up to anouther 150 just to get it fixed at a small engine shop well i get it back today and i hop it work as plaind .. i thinking of putting on a different frame for a new start .
     
    #1 andrewg225, Sep 10, 2009
    Last edited by a moderator: Sep 11, 2009
  2. Dave31

    Dave31 Moderator
    Staff Member

    Joined:
    Mar 1, 2008
    Messages:
    11,207
    Likes Received:
    13
    Welcome Andrew to motorbicycling.com, we are glad to have you with us.

    Man, sounds like your first experience has not gone well. Hope things get better these motorized bicycles are so much fun.
     
  3. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    Thanks now i have carberator probloms i got my engine back withe a new spark blug
     
  4. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    i just took the carbapart and put a new gasket in there the jes where fine i think now i'm going to clean out my gass tank
     
  5. Goat Herder

    Goat Herder Gutter Rider

    Joined:
    Apr 28, 2008
    Messages:
    6,250
    Likes Received:
    2
    Welcome to the forum! Check the classic post section over for more familiarity . Lots of great stuff in there.
     
  6. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    k well i'm finish for the day and i still cant' get it going i took off the tank and i founed this rubber pice in side there .. doun't know what it's 4 i cleaned the filter and took all the junk out and now the carb is still leakeing .. i'm just not getting the cupow that i need with this mabey tomorow with pozitive rezolts
     
  7. Humsuckler

    Humsuckler New Member

    Joined:
    Jul 28, 2009
    Messages:
    458
    Likes Received:
    0
    where at in ontario are ya buddy? i live in embrun 20 minutes east of ottawa center.
     
  8. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    and again no luck now i think it's my megneto
     
    #8 andrewg225, Sep 12, 2009
    Last edited: Jan 20, 2010
  9. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    well it's not my megneto it's the spark plug and the gass mixtur to tomorow i will get it running hopfuly ..
     
  10. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    well i changed my spark plug that was it ... i went to the engine doctor and he say s it's my crank causeing low conpresion well will see tomorow
     
  11. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    Hi everone .. it's been a while since i posted anything on here so i'll post somthing now ... so after all this money and time and stressing out i desided to just get a new kit with a few extra parts .. like a new megneto and a new coil and a gasket kit added on to this order .. so NO more spending un nesserary money at small engine shops with cool names thay laugh at me when i brough it in thay hade know clue what it was ... thay did a spary test on it and it was a the coil that was shortening out .
     
  12. Humsuckler

    Humsuckler New Member

    Joined:
    Jul 28, 2009
    Messages:
    458
    Likes Received:
    0
    these are all things you can troubleshoot YOURSELF my friend. Head to the closest rona and look where they keep all the spark plugs and yard odds and ends. They have everything from muffler sealing tape to jb weld if you find that little ten foot long section of shelf. (its right around the mix oil and WD 40)

    i got a little carried away on the description but in that area you will find an ignition tester! it looks like a pen, you touch the end to the wire and dump the clutch, it should light up if yo have spark!

    glad to hear more from you my friend, i just built my new bike too. Going with a shift kit next week and i am awaiting an air intake and copper gasket from manic mechanic.
    I picked up the 68.5 cc slanthead from zoom what did you get?
     
  13. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    i was thinking of getting a 80 to 66 cc from kings i just need 50$$ then i can order.. hopeing to get it bye next month and then mabey i can ride be for the winter comes .. if not it will give me time to think of outher stuff but hey thanks ill go cheak out that and find a hard ware store and pick up that ingnition pen thing .. i pretty sure there a rona here ... thanks for replaying
     
  14. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    ok now i'm getting spark and alot of spark i think when i brought my engine to shop thay might of put the head on backwords couled that be a posability
    ???
     
  15. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    Thanks To my freind he go my engine running . and it workes awesome he took the head and the cylender off and changed the gasket ..The gasket that was on there that i payed !24 dollers for was covering the holes in side the cylender ,causeing it not to work ... leading me piset off , And confused ..oh well i'm happy that it worked again !
     
  16. Humsuckler

    Humsuckler New Member

    Joined:
    Jul 28, 2009
    Messages:
    458
    Likes Received:
    0
    tsk tsk. dont you hate it when the doctor gives you the wrong medicine and kills you?

    that is kind of ****ed up. im guessing you paid the shop $24 for the gasket? and then they even put it in without making the transferrs? good to know. i bet they do it to people for extra buisness.....

    glad to hear you are smokin' again :) now get out there and experience riding in snow.
    its hella touchy and slippery!
     
  17. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    no i payed 124 for a gasket change lol 70 dollers anhour and your right thay do it to rip ppl off like me that no barly nothing about engines lol .. yeah when my friend got thatengine running it worked awesome just like new lol i'm selling it to him so i can get a new one . there alot of snow here where i live i cant even get in to my shed it's covered in snow .. and it need a new clutch and pucks .. well thanks for riteing back ..
    have a goo one
     
  18. Humsuckler

    Humsuckler New Member

    Joined:
    Jul 28, 2009
    Messages:
    458
    Likes Received:
    0
    the best thing you can do, is go out and find yourself a piece of crap little weed eater or chainsaw to "troubleshoot"

    sit it on a workbench, and start methodically frigging with it until you know that it will start. you shouldnt have to even open anything up besides the igniton parts cover, mabye the rewind and the carburator for sure!

    step one is to look it over throughly and get to know it. if you find a hole in the bottom of the engine (crankcase) you need not troubleshoot anymore, you have just graduated step one lol

    good luck, read, post.

    -dave
     
  19. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    yeah i'll try that i think there one in the shead i can play with thanks
     
  20. andrewg225

    andrewg225 New Member

    Joined:
    Jul 19, 2009
    Messages:
    69
    Likes Received:
    0
    head gassket
    muffler
    chain stay
    for my engine to be working 99 % better or i couled take that money and get a new kit
     

Share This Page