Shift Kit and 3 speed hubs

chainmaker said:
Hey Norm,
What kind of bike are you thinking??

Cheers
Click to expand...

I'm thinking of puting it all on the Felt Slater! ;)

I ordered the large rear hydraulic disc & brake today. (I already have a matching front.)

I was talking to my homie who runs a bike rental shop, & he was telling me that Sturmey hubs have always been cr*p! (But he doesn't know if the new ones are any good or not?)
He did say that the Shimano hubs have always been rock solid! So I'm now gonna look for a Shimano 8-speed disc hub.

I'll keep y'all posted.
 
Chiming in with my X-RD3 here. I bought mine last year after talking to BarelyAwake and love the hub. I'm running a HS+4G on SBP mount. The only thing I've changed is the shifter - went with a classic 3-speed trigger instead of the twist-grip.
 
As of today, I have a SBP HD shift kit in hand; & a 185 hydraulic disc & a Shimano 8-speed internal shift hub on order.... I'll keep y'all posted! ;)
 
I got the Shimano 8-speed disc brake hub today!! Now I'm just waiting on the brake to get started!!!
vmbshimanohub.jpg
 
Yes.....please let us know how that hub works out and if it is shift-kit worthy....should be a great set-up on yer Slater! Thanks.
 
Thats a beefy looking hub!! I havnt had any takers on the 8 speed yet, I might have to end up using it on the Panther.

Cheers
 
Maybe this is telling Me somthing,..... I just went to SBP site to buy a HD kit "SOLD OUT" Got My huskys last night and delaced em , now I have to drill the sturmeys for 12 GA. thanks for doing that springer mod on that hub for Me Norm!!

Cheers
 
Chainmaker, before you go drilling your hub check and see if your 12's will slide thru without drilling. My XRD-8 hub took 12's with no drilling even though the SA tech sheet says it only goes to 13.
 
mdlee1958 said:
Chainmaker, before you go drilling your hub check and see if your 12's will slide thru without drilling. My XRD-8 hub took 12's with no drilling even though the SA tech sheet says it only goes to 13.
Click to expand...


I checked them last night....They fit fine no need to do any drilling. Finished de-spoking the other husky last night and snapped 4 spokes there was some kind of adhesive on them not loc-tite, I was hoping to reuse atleast one set if they were in good shape but not now, so I measured everything on the hubs and ordered 72 custom cut 12Ga stainless spokes, and 36 14ga. for Her bike.

Cheers
 
chainmaker said:
Maybe this is telling Me somthing,..... I just went to SBP site to buy a HD kit "SOLD OUT" Got My huskys last night and delaced em , now I have to drill the sturmeys for 12 GA. thanks for doing that springer mod on that hub for Me Norm!!

Cheers
Click to expand...

Post some pix when you get it all together!! :)
 
When I got home last night I started de-lacing the rear wheell and broke 4 spokes I ordered all new ones, I should get them the end of next week, Ill start a build thread of the 2 bikes.
Cheers
 
What are the axles on these hubs made of?? I know I bent a few steel ones on my freewheel hub before switching to chromoly.Can internal hub axles be changed or upgraded?
 
Here's a little update... I got the Shimano 8-speed hub laced into one of the Felt wheels with 12 ga spokes...
Next I'll lace a Shimano front disc brake hub into the other.
I have all the SBP shifter parts at the powder coater, & they should be ready at the end of this week.
vmbfeltslaternewhub.jpg
 
Last edited:
I am building a jack shaft to clear my phat rear tire on a coaster cruiser. I noticed Slick Bike Parts has two different size sprockets on his shift kit. I was thinking both sprockets should be the same. Any ideas?
 
Spokes finally came yesterday..I got home late and had to leave early for work. I have tomorrow off Im going to lace them up and start a build thread for the bike they are for.
Cheers
 
You must log in or register to reply here.
Back
Top