What about this:My plan is to replace the bushing with sealed ball bearings.
The ideal size would be a bearing 15x20mm but they are not made.
http://www.bocabearings.com/bearing-inventory/radial-bearings/9558/15x20x3-5-mr2015
What about this:My plan is to replace the bushing with sealed ball bearings.
The ideal size would be a bearing 15x20mm but they are not made.
Radial bearings, that's clever, but $25 a pop is steep.
How's that gear ratio working? I got a 36t pirate sprocket which will still be lower gearing than my ez motorbikes but I do not have big hills around me.Hi Gentlemen,
I'm sharing the finished project of my first build, which used the 7g kit.
It is a Micargi Pantera Frame, Husky Bike wheels with 11g spokes, a Manic Mechanic rear 44t sprocket, the Ghost Racer 7g kit, springer front fork, and an old Pacer moped tank I had repainted by our local technical school.
I am very interested in seeing if anyone can lick this 'bushing to bearing' conversion for the clutch bell, since I am already experiencing the 'cymbal monkey' sounds emanating from the clutch.
Nice build Vlad but I'm a bit disappointed to only see one brake on it.I am very interested in seeing if anyone can lick this 'bushing to bearing' conversion for the clutch bell, since I am already experiencing the 'cymbal monkey' sounds emanating from the clutch.
Thanks for the HIX info, I put HIX plugs in all my 2-stroke builds, nice to know there is a compatible 4-stroke one.As for a spark plug I learned from Scotto- that the NGK CR7HIX iridium one works awesome. I use one and I agree with him.