Mystery Part?

7

70chevelleman

New Member
I recently adjusted the throttle cable and when I went to put the top of the carburetor back on I found this on the ground (see pic). I have no idea where it fits back into place? I have a CNS carb btw.

Someone Please help!
:-||
 

Attachments

  • MysteryPart.jpg
    MysteryPart.jpg
    33 KB · Views: 213
are you sure that it fell off of your carb and i's not just some random part that was laying on the ground the entire time?
I have never seen a part like that in any carb that I've ever messed with.
if you google "cns carburetor for motorized bicycles", you will run across several pics of the carb all torn apart and there's nothing in any of the pics that even look like that part.
 
Last edited:
Hoze513 said:
It looks like the spacer that goes inside the carburetor, where the manfold goes in.
Click to expand...

no, that part is way too small to be that. he's holding it in the palm of his hands and you can see the lines in his skin....which shows how small this peice is.
besides that, the part that goes in the carb where it slides onto the manifold is a peice of round plastic tubing, about 1/2" in diameter.
 
dragray said:
no, that part is way too small to be that. he's holding it in the palm of his hands and you can see the lines in his skin....which shows how small this peice is.
besides that, the part that goes in the carb where it slides onto the manifold is a peice of round plastic tubing, about 1/2" in diameter.
Click to expand...

Sorry just a newbie trying to help another newbie.
 
no, no...don't be sorry.
sometimes a wild guess can lead you in the direction of the answers you're looking for.
I'm newer here than you so in reality, i'm the newbie here.
But i have been around this stuff for many years.
 
You are right it is not the carb spacer, the spacer is 3/4 inch i.d. (.750). In the opening post he said he removed the top of the carb, I have removed the barrel from mine many times without removing the carb from the intake. I don't know what that is!
 
Ahhhh its a freebee from China, just to screw with your mind. I have never seen anything resembling that part in any kit I've bought.
 
It looks like an in tank fuel pickup with filter off a weed eater or chain saw. It doesn't seem to be a filter though. It looks like hard plastic. Must be a tickulator valve.
 
i think it's just a random part that was laying there on the ground the whole time to be honest with you.

I think it might be a henweigh tho, the more i look at it.
 
Thanks everyone for all the help! I just got this kit recently and didn't want to screw it up by forgetting to put something back where it belongs, haha

After reading everyone's replies I decided it was just a random part that happened to be outside, right next to where I was working. It had some sort of gasoline residue on it which is what made me think it was from what I had been working on.

Anyway, I started it up today and everything ran great! .shft.

Thanks again!
 
You must log in or register to reply here.
Back
Top