Motor Bicycle Tuned Pipe...One step closer to production!

Andyinchville1

Andyinchville1

Manufacturer/Dealer
Hi all,

As some of you may know, I have been tinkering with making a tuned pipe / expansion for our little engines...Well I am happy to say I am 1 step closer to an actual production model....I will try to post some pics here now (this model is specific to the Dax 70 but may fit others as well).

The unit was designed the most difficult installation (small frame mountain bike, low rake fork, and over sized tubes) so it should fit on other bikes easily. The unit is adjustable as well without need for difficult bending. Weight is approximately 5.4 lbs. in prototype form. This pipe was designed to be far away from the riders legs so as not to interfere with normal pedaling and bicycle use.

Pipe will allow you to gear up substantially....It will pull me up the steepest of hills here in Charlottesville using a 36T rear sprocket faster than a stock bike with a 44T sprocket....I am thinking of gearing up even more in the future.

Andrew
 

Attachments

  • DSC03789.JPG
    DSC03789.JPG
    216.5 KB · Views: 1,623
  • DSC03821.JPG
    DSC03821.JPG
    335.4 KB · Views: 11,017
  • DSC03828.JPG
    DSC03828.JPG
    369.5 KB · Views: 2,465
  • DSC03832.JPG
    DSC03832.JPG
    351.7 KB · Views: 872
Re: Tuned pipe...One step closer to production!

Andy
I'm waiting for your post after the Va. highway patrol pays you a visit along side the road. I hope for your sake it legal to ride over 30 mph on your bike there. My experience with them boys wasn't good they have the idea that until everyone is in jail the game isn't over. But I lived in the mountains of Va. and not out on the flats/piedmont so maybe it was something in the water that made the HP in my area so ornery. Good Luck
Norm
 
Re: Tuned pipe...One step closer to production!

looking forward to that pipe being available. i got thrown in jail in va for speeding. i grew up in alexandria right outside of dc and the police pulled me over and sent me right to jail. i had a 68 firebird with a 400 in it and was only doing 120 in a 25 mph zone :eek:. in front of the DOD building is not a good place to race even if on the weekend and no other cars
 
Re: Tuned pipe...One step closer to production!

You were a naughty boy. Did they slap you around a little bit? rotfl
 
Re: Tuned pipe...One step closer to production!

nope was only 17 and mom and dad came and got me quick lol
 
Re: Tuned pipe...One step closer to production!

Not only naughty but a luckly boy. I wonder what might have happened? Oh! That can't be good! rotfl
 
Re: Tuned pipe...One step closer to production!

Jailed?....Wow....But I guess that's only cause you didn't have the other accessory I may
sell to go with the pipe....A "cloak" and "hyperspace" button! HA

Andrew
 
Re: Tuned pipe...One step closer to production!

Andy
I'm waiting with checkbook in hand for that one.
 
Re: Tuned pipe...One step closer to production!

I would like a hyperspace button. A cloak would be great too. I'd pay for those...........................:D
 
Hi,

HI,

I am making some progress but the going is still very slow....Hopefully just a little while longer!

Thanks for your interest and patience.

Andrew
 
the invisibility cloak that is being developed in japan that was in popular sicence would be great. No more getting pulled over.
 
Watching this thread closely. I'd like a tuned pipe as well. Have one Im going to chop up and reweld to fit for now, but one made just for a bike would be GREAT!!
 
Put me on the short list for the pipe, Andy. I'll wait till Christmas for the cloak and HS button. But I gotta get the tuned exhaust before datz510 or I'll never keep up to him.
 
Heh heh...I like that Lennyharp....better watch out tho cause Datz510 may get a sprocket AND the pipe! ;-)

A little competition....that sounds like FUN!

I'll keep you guys in mind.

Thanks!

Andrew
 
I have built and rebuilt lots of things, cars, trucks, mowers, and tractors, but only one motrorized bike. I was suprised with how quiet my HT motor is. I suspect that the quietness of the stock muffler is costing horse power. I once complained about the loud pipes on my motorcycle. The salesman said, "If it's too loud, you're too old!" Just like music, the volume of the note isn't necessarily related to the quality of the note. I now have loud pipes on the motorcycle, but the note is sweet also. How much louder is this one over the stock HT?
 
You can install a muffler/silencer on the end of the tuned pipe to quiet it down to close to the stock sound level.

The tuned pipe itself is designed to use the exhaust pulses to help force the intake charge back into the cylinder. That's where the power increase comes from. You can then run a silencer on the end of the pipe to quiet it down a lot.
 
HI Jstude,

The tuned pipe to me sounds to be about the same loudness as the stock HT muffler....just a little deeper tone....We did a You Tube video doing a comparison in sound levels you could look up....

I have toyed with the idea of taking the output of the silencer and running it into a car (yes car) muffler to see how that affects sound / performance....My thoughts are that it
should be very quiet and the performance would be unaffected since the car muffler is designed to flow way more volume of exhaust than our little engines can generate...Mounting something that large tho may be a problem....Also there are those here that say the intake can be loud too....I guess I'll try one step at a time if I get some free time.

Andrew
 
You must log in or register to reply here.
Back
Top