AMF Roadmaster

I think if you bend your pipe some so the front of the muffler is out further it will be ok you can always put a small heat sheald in between.............Curt
 
Well don't you hate it when you run into a little problem? I just ran into a real pain in the backside one. The Chain and chain stay seem to have a contact issue.

Front to back in runs true it is when it crosses over the chain stay that the problem comes in to play.
Chain Line 1.jpg


Chain Line 2.jpg


Chain Line 3.jpg


So they have to be moved like in the mock up....
Chain Line 4.jpg


Almost all back together for the chain stay.
Chain Line 5.jpg
 
I had npticed that it looked like the chain would run inline with frame but I figured you had a plan for that.

Map
 
mapbike said:
I had npticed that it looked like the chain would run inline with frame but I figured you had a plan for that.

Map
Click to expand...

I was going to use an idler sprocket, but someone told me that it might not be a good idea to do on the top side chain seeing as that is where most of the torque gets put on the chain.
 
dracothered said:
I was going to use an idler sprocket, but someone told me that it might not be a good idea to do on the top side chain seeing as that is where most of the torque gets put on the chain.
Click to expand...

I agree not a good way to do it, build is looking very good.....

Map
 
I can tell just the way you are going at it you realy like your new welder?
Same way when i got mine.............Curt
 
I say we start a betting pool on what color you paint it's getting close to the
"GRADE UNVALING CEREMONY" I got a buck on blue. laff
 
You must log in or register to reply here.
Back
Top