2016 EXCELSIOR Board Tracker Flat Head Build

Well it's been awhile since I posted, these are the updates. The bike build is done and parts are off to powder coating and have yet to drop off the others for chrome. I completed the handle bars today with the internal throttle and polished the stainless bars...turned out nice. I ended up polishing the bottom bracket setup too...getting a little carried away I think....

Take a look at that powder coating, you could not do better with a top notch paint job. That black is deep...

Wheel tire setup in one of the pictures, was thinking of using the felt quick bricks in black, my kids says don't do it...run the ones like on the back wheel.

I have this little trick setup that came with the motor for a kill switch, required for junior dragster class...polished and will set this up as a kill switch for the motor.

Still have a lot to do but looking forward to completing....
 

Attachments

  • image-701830661.jpg
    image-701830661.jpg
    676 KB · Views: 239
  • image-2062168441.jpg
    image-2062168441.jpg
    693.6 KB · Views: 240
  • image-1686906163.jpg
    image-1686906163.jpg
    421.6 KB · Views: 243
  • image-511928779.jpg
    image-511928779.jpg
    427.6 KB · Views: 240
  • image-1101097897.jpg
    image-1101097897.jpg
    528.2 KB · Views: 247
  • image-1291988115.jpg
    image-1291988115.jpg
    518.8 KB · Views: 303
  • image-2072248636.jpg
    image-2072248636.jpg
    592 KB · Views: 287
I've had a difficult time deciding what I like best about your X. The engine, frame or ...? Bottom line. What difference does it make? I can't see any compromises. It all works wonderfully well together. Great work! Rick C.
 
Hey Jeff,

Nice looking parts, so shiny. Man, those Helmutt frames just have the "right" stance, you know? I especially like how the engine crankshaft sits far below the axle height. I really like it when the engine sits lower like that, lower center of gravity and all.

As always, top notch work, it does make me a little sad though to think that this will be your last gas bike build, say it aint so!

Anyways, if it turns out to be the last gas bike you build, way to go out on a high note!

I look forward to seeing this bike in action some time.

Take it easy bro,

Gilbert
 
Spent a little time on the bike today, installing a steering damper on the bike, mocking up and placement of the fork tab is critical so I am taking my time. Got the reduction drive installed, that black and polished aluminum contrast is killer...

Still prepping parts to get chromed, going wild on this one.

Gilbert: this may not be my last gas bike, the next one may be a crazy race bike that I will sponsor for someone to race...we shall see.
 

Attachments

  • image-4291381710.jpg
    image-4291381710.jpg
    452.6 KB · Views: 235
  • image-1016925018.jpg
    image-1016925018.jpg
    465.7 KB · Views: 238
  • image-780898922.jpg
    image-780898922.jpg
    374 KB · Views: 221
  • image-164402932.jpg
    image-164402932.jpg
    476.7 KB · Views: 248
  • image-2687144789.jpg
    image-2687144789.jpg
    458.1 KB · Views: 209
Oh man that build is so gorgeous, the motor is looking great!!! There really is no replacement for the finish of machined billet parts. Love the detail work, magneto is painted and rope start cup has the minimum slot in it.

Watch out though! My rope start caught it again and WHIPPED the **** outta my leg. This pic is a week after... zpt
 

Attachments

  • image.jpeg
    image.jpeg
    42 KB · Views: 207
culvercityclassic said:
Gilbert: this may not be my last gas bike, the next one may be a crazy race bike that I will sponsor for someone to race...we shall see.
Click to expand...

Now that's what I wanted to hear! CCC still in the internal combustion game!

I know this bike is still not finished, but the idea of you building a new race bike is super exciting. We've missed you at the track.

Keep in keepin' on,

Gilbert
 
Hey Gilbert good new on the health issues so I am good and on the track for builds. A few pictures of what going on, parts off for chrome ( dont ask what it going to cost...it will shock you but when done it will surprise you) Ordered some new tires, to help fit the look: felt quick bricks look good on a 50mm rim so i am excited. Random pictures of the build: having a good time with this one for sure
 

Attachments

  • image-3148522576.jpg
    image-3148522576.jpg
    471.7 KB · Views: 211
  • image-3548239448.jpg
    image-3548239448.jpg
    443.2 KB · Views: 210
  • image-2692750868.jpg
    image-2692750868.jpg
    425.6 KB · Views: 204
  • image-3968612042.jpg
    image-3968612042.jpg
    426.1 KB · Views: 224
  • image-1720060593.jpg
    image-1720060593.jpg
    475.9 KB · Views: 223
  • image-1217112748.jpg
    image-1217112748.jpg
    569.2 KB · Views: 225
  • image-2450265509.jpg
    image-2450265509.jpg
    444.8 KB · Views: 237
  • image-61211521.jpg
    image-61211521.jpg
    637.9 KB · Views: 220
A little update, while waiting for parts I have started on the tank and battery box. Got a nice yahoo in the metal right below the filler on the side, must have been from the heat while welding...this will be a challenge to get this right...I may give it a shot or tap out and farm it out. Want it to look right and also add some custom lettering to both.
 

Attachments

  • image-2784485173.jpg
    image-2784485173.jpg
    412.2 KB · Views: 233
  • image-3878557912.jpg
    image-3878557912.jpg
    397.9 KB · Views: 207
  • image-1602103593.jpg
    image-1602103593.jpg
    410.9 KB · Views: 191
Sill waiting for parts that are being chromed, nice long weekend so I got to play in the garage all day. Polished the stanless intake, worked on the motor mount and mounted the motor. Received the tires from felt and installed them, look nice and will go good with the bike. Still have stainless hardware to polish and sort out.

The tank and seat pan are going to take some work, still not sure what I am going to do, want nice paint and a leather covered seat.... $$$$
 

Attachments

  • image-1372652313.jpg
    image-1372652313.jpg
    451.2 KB · Views: 236
  • image-4027981743.jpg
    image-4027981743.jpg
    407.4 KB · Views: 230
  • image-818279719.jpg
    image-818279719.jpg
    602.4 KB · Views: 208
  • image-859851756.jpg
    image-859851756.jpg
    554.1 KB · Views: 222
  • image-3322257964.jpg
    image-3322257964.jpg
    501.8 KB · Views: 270
  • image-2944869441.jpg
    image-2944869441.jpg
    467.4 KB · Views: 222
  • image-3254054501.jpg
    image-3254054501.jpg
    504.2 KB · Views: 255
  • image-3262143430.jpg
    image-3262143430.jpg
    521.3 KB · Views: 225
Sunday Fun Day, relaxing and doing little things to the bike. Wanted a nice velocity stack for the mikuni carb but could not find one to fit the 22mm, so I took the bat from my kids little league days and chop-machine and polished it...way better than I thought it would turn out.

Chrome should be done this week I hope, then it's time to build!!!!!
 

Attachments

  • image-958226749.jpg
    image-958226749.jpg
    472.2 KB · Views: 189
  • image-2194352595.jpg
    image-2194352595.jpg
    732 KB · Views: 210
  • image-2157967447.jpg
    image-2157967447.jpg
    474.6 KB · Views: 193
  • image-885384083.jpg
    image-885384083.jpg
    707.6 KB · Views: 240
Thanks MotoMagz, I have got carried away on this bike build and really no turning back now. I guess this will be my event rider since every weekend something is going on in California.
 
A little more work, the nice billet head had three areas on it to bolt the shroud to the motor that were not going to be used, chopped them off and polished the cut area...looks so much cleaner
 

Attachments

  • image-3878205729.jpg
    image-3878205729.jpg
    666.7 KB · Views: 195
  • image-521969801.jpg
    image-521969801.jpg
    811 KB · Views: 243
  • image-369407836.jpg
    image-369407836.jpg
    666.1 KB · Views: 221
Nice build! Looks like you hit a home run with that velocity stack...... I know, that was pretty bad.
 
Home run on the chrome Pat...got it today, I may have over did it. Picked up the chrome and kinda started to assemble, may have to get use to the bling. Different thats for sure....The build completion starts...
 

Attachments

  • image-3420402958.jpg
    image-3420402958.jpg
    520.4 KB · Views: 197
  • image-1516632869.jpg
    image-1516632869.jpg
    527.4 KB · Views: 218
  • image-2288105452.jpg
    image-2288105452.jpg
    683.8 KB · Views: 202
  • image-1774075115.jpg
    image-1774075115.jpg
    474.1 KB · Views: 205
Hey Jeff,

So glad to hear that things turned out ok on the health front, you had me worried. All I can say about all that new chrome bling is you will have a lot of cleaning to do after every ride. Speaking of rides, to me, riding the creation is what it's all about.

I want to ride with you when this bad boy is done. I will be out of town the week of July 18th-22nd. After that, I want to check in with you and try to schedule a ride, maybe the maiden voyage through town to the beach?


Let me know bro, haven't seen you in a while,

Gilbert
 
Also I forgot to mention, this is one bad ass build, to go down in history as one of the most bad ass builds ever!

Flathead Briggs forever!

You da man, mother f-er!

Ride or die,

Gilbert

PS: please excuse my French.
 
You must log in or register to reply here.
Back
Top