Media added by CTripps

GoldenMotor.com

Navigation

  1. Example Category 137
Browse albums

Most media items

  1. allen standley
    81

    allen standley

  2. John Newkirk
    46

    John Newkirk

  3. Mark Murphy
    36

    Mark Murphy

  4. Tyler6357
    36

    Tyler6357

  5. W
    29

    Weedge1212

Media statistics

Categories
1
Albums
1,888
Uploaded media
9,677
Embedded media
17
Comments
1,006
Disk usage
1.5 GB
The deck is 3/4" plywood, triple-coated and sealed. It's held on with conduit clamps and #8 screws.

The deck is 3/4" plywood, triple-coated and sealed. It's held on with conduit clamps and #8 screws.

  • 0
  • 0
Back of the trailer, with a bit of reflective tape and some lights (not wired) up on the top rails.

Back of the trailer, with a bit of reflective tape and some lights (not wired) up on the top rails.

  • 0
  • 0
Here's the connector for the trailer.

Here's the connector for the trailer.

  • 0
  • 0
Added some reflective tape along the trailer arm.

Added some reflective tape along the trailer arm.

  • 0
  • 0
Vis-vest spread across the back of the trailer. Eventually I'll probably put together a battery box and switch for the lights on the upper rails.

Vis-vest spread across the back of the trailer. Eventually I'll probably put together a battery box and switch for the lights on the upper rails.

  • 0
  • 0
The connector for the trailer bothers me a litte, there's less than 1/16" clearance fom the clamp to the drive sprocket.

The connector for the trailer bothers me a litte, there's less than 1/16" clearance fom the clamp to the drive sprocket.

  • 0
  • 0
The trailer behind my wife's MAB.

The trailer behind my wife's MAB.

  • 0
  • 0
The trailer, left side.

The trailer, left side.

  • 0
  • 0
The trailer behind by wife's MAB. It has a 48T sprocket, and pulls the trailer without a strain.

The trailer behind by wife's MAB. It has a 48T sprocket, and pulls the trailer without a strain.

  • 0
  • 0
An old vis-vest spread across the back.

An old vis-vest spread across the back.

  • 0
  • 0
Our little cargo trailer.

Our little cargo trailer.

  • 0
  • 0
Close up: Spring Muffler Hanger

Close up: Spring Muffler Hanger

  • 0
  • 0
Updated photo, Aug. 4, 2012

Updated photo, Aug. 4, 2012

  • 0
  • 0
Nishiki Norco Apache 01006000 30 66cc Motor Installed Rear view

Nishiki Norco Apache 01006000 30 66cc Motor Installed Rear view

  • 0
  • 0
Unknown Scooter 04

Unknown Scooter 04

  • 0
  • 0
Unknown Scooter 03

Unknown Scooter 03

  • 0
  • 0
Unknown Scooter 02

Unknown Scooter 02

  • 0
  • 0
Unknown Scooter 01

Unknown Scooter 01

  • 0
  • 0
Build #2 - Everest Quest with 66/80cc motor, 48-tooth sprocket - Front Left Side

Build #2 - Everest Quest with 66/80cc motor, 48-tooth sprocket - Front Left Side

  • 0
  • 0
Build #2 - Everest Quest with 66/80cc motor, 48-tooth sprocket - Handlebars Keeping it simple for now, air horn and headlight to be acquired still.

Build #2 - Everest Quest with 66/80cc motor, 48-tooth sprocket - Handlebars Keeping it simple for now, air horn and headlight to be acquired still.

  • 0
  • 0
Build #2 - Everest Quest with 66/80cc motor, 48-tooth sprocket - Right Side

Build #2 - Everest Quest with 66/80cc motor, 48-tooth sprocket - Right Side

  • 0
  • 0
Build #2 - Everest Quest with 66/80cc motor, 48-tooth sprocket - Left side

Build #2 - Everest Quest with 66/80cc motor, 48-tooth sprocket - Left side

  • 0
  • 0
Build #1 - Speed NT carb.

Build #1 - Speed NT carb.

  • 0
  • 0
Build #1 - Starin' at ya.

Build #1 - Starin' at ya.

  • 0
  • 0
Top Bottom