Prev
The deck is 3/4" plywood, triple-coated and sealed. It's held on with conduit clamps and #8 screws.
Next
Prev
The front and back bars of the trailer are smaller in diameter, and set at a slightly different hieght to the middle bar. There is a 1/4" plywood shi
The connector clamped on to my bike. I had to go farther ahead to clear the 36T and chain, putting the trail really close to the back wheel.
Right rear angle.
The deck is 3/4" plywood, triple-coated and sealed. It's held on with conduit clamps and #8 screws.
Back of the trailer, with a bit of reflective tape and some lights (not wired) up on the top rails.
Here's the connector for the trailer.
Added some reflective tape along the trailer arm.
Next
CTripps

The deck is 3/4" plywood, triple-coated and sealed. It's held on with conduit clamps and #8 screws.

  • Media owner CTripps
  • Date added
There are no comments to display.

Media information

Album
Trailer
Added by
CTripps
Date added
View count
498
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top