GoldenMotor.com
Here's the connector for the trailer.
Right rear angle.
The deck is 3/4" plywood, triple-coated and sealed. It's held on with conduit clamps and #8 screws.
Back of the trailer, with a bit of reflective tape and some lights (not wired) up on the top rails.
Here's the connector for the trailer.
Added some reflective tape along the trailer arm.
Vis-vest spread across the back of the trailer. Eventually I'll probably put together a battery box and switch for the lights on the upper rails.
The connector for the trailer bothers me a litte, there's less than 1/16" clearance fom the clamp to the drive sprocket.
CTripps

Here's the connector for the trailer.

There are no comments to display.

Media information

Album
Trailer
Added by
CTripps
Date added
View count
362
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Top Bottom