This!!! It has long legs now but i need more off the line power.72T is a HUGE sprocket!!!!
Just out of curiosity, what's it gonna be used for??
Yeah. The reason I said run the gold 35 chain is cause I know your setup is gonna fail. For starters 41 is crap, 212ers run at least 420 better a 428 gold chain. A 212 is going to eat it up. 41 chain is real weak even for 4hp. Because of the small tooth count on the 10t it will eat the sprocket the moment the chain goes bad. This means new clutch. A worn sprocket will eat up any new chain you put on even if it is 420 chain. On the primary where rpms are higher you need to think about minimum tooth counts and chain link angles, and link acceleration. In your case only a primary. A minimum 14t anywhere is ok. 35 gold chain is good stuff.Thanks gents, the one 5-7 posted is 76 dollars!! Whoa!!
Its going on a 212 build with direct drive from a 10 tooth clutch so i need the big gear. I already have a 41 chain setup.
Nice looking bike!!!This!!! It has long legs now but i need more off the line power.
Thanks, its a friggin huge bike..........really long. I cant go anywhere without drawing a crowd. I too think 41 will be ok. We'll see i guess.Nice looking bike!!!
I have built some big HP bikes before and always use #41 with no issues.
I use this:
https://www.grainger.com/product/TS...-Chain-2W094?searchBar=true&searchQuery=2w094
41 chain is $38.65 / each for 10 Feet so 2 chains.$40 for a chain?!! $70 for a sprocket?!!
You guys are killing me. KILLING ME!!