the Cafe Racer build commences!
- Thread starter bushido
- Start date
So that's it for the first installment of the build. As you see in the photoshop I did, I'm planning on adapting a moped seat. I haven't decided yet if I'm going to make my own, or if i should buy one..
I wanted to ask your opinions of running shocks to the rear axle to support the seat, as im not sure if it is a good idea to add stress there. I'm open to suggestions about how I can make this work, got any ideas?
The 67.5cc engine kit will be ordered in a few days and i'll definitely keep you guys posted with the progress!
I wanted to ask your opinions of running shocks to the rear axle to support the seat, as im not sure if it is a good idea to add stress there. I'm open to suggestions about how I can make this work, got any ideas?
The 67.5cc engine kit will be ordered in a few days and i'll definitely keep you guys posted with the progress!
That tank would be great for the long distance machine I will need for my America ride 
What model is it from?
Jemma xx
What model is it from?
Jemma xx
it's from a 1977 General 5-star Moped. I think it'll hold 2 gallons. Good luck finding one though, the tanks themselves are easy to find but the caps and petcocks are virtually non-existent.
Looking Awesome 
Hey, this one will look pretty sweet I bet. Nice find on that gas tank.
I think adapting that straight seat will look pretty awesome if you ask me. looks like you could pull it off of that similar style motorcycle as well as a moped.
No idea about the shocks though...but it sounds like a great idea
I think adapting that straight seat will look pretty awesome if you ask me. looks like you could pull it off of that similar style motorcycle as well as a moped.
No idea about the shocks though...but it sounds like a great idea
i love the concept! very original! please keep us posted on the build.
yeah, i went through the same stages of search for a little two-wheeled local transportation that you did. i looked more at the Hooper Imports 110cc Trail Ryder (Chinese Honda CT70 repro) than the Kikker, though (same engine). when i stumbled onto this forum, though, i knew i wanted to build a motorized bike.
anyway, good luck with your build. i'll be on an eager lookout for updates!
yeah, i went through the same stages of search for a little two-wheeled local transportation that you did. i looked more at the Hooper Imports 110cc Trail Ryder (Chinese Honda CT70 repro) than the Kikker, though (same engine). when i stumbled onto this forum, though, i knew i wanted to build a motorized bike.
anyway, good luck with your build. i'll be on an eager lookout for updates!
An ultra-light cafe racer will rock. I love your idea.
Have you considered a going with racer seat instead? There'd be some fabrication involved with a mini-subframe type seat support, but a rounded off painted tail would look awesome, and really tie the racer look together.
Have you considered a going with racer seat instead? There'd be some fabrication involved with a mini-subframe type seat support, but a rounded off painted tail would look awesome, and really tie the racer look together.
I found an article about the Derringer Cycles....said that they cost $3,500, but you get to choose your options and you get a cute matching helmet! Yah! I am working on building one, but more like a true board track racer with the seat at the right hight (between the rear fender and the upward rise of the top bar) I'll keep everyone posted as it comes together.
My goal is to have white balloon tires, springer front end, color matched wheels, frame and tank.
Derringer uses Brookes England seats, which cost $120+. My build will be MUCH less in cost.
My goal is to have white balloon tires, springer front end, color matched wheels, frame and tank.
Derringer uses Brookes England seats, which cost $120+. My build will be MUCH less in cost.
your bike build is cool. I think the shocks for your seat should be ok and not cause any problems
Id have to look the gas tank end seat pivot p and the braced frame and ridgid cross frame with roller bearings on the end/sides of the seat for the top of the shock tower to be ridgid enough to not twist then I might agree.
Little braze work never hurt anyone
Little braze work never hurt anyone
I would have probably bought a Kikker Bobber kit but I was concerned about emissions testing. New motorcycles don't require an emissions test for the first 5 years in Maricopa County. I don't think the Kikker would pass that first smog test.
I enjoy my MTB based motorized bike but I would love to build something with the Kikker look.
I enjoy my MTB based motorized bike but I would love to build something with the Kikker look.
Nice concept Bushido!
I would very much like to attempt to acquire that moped!
I was born and almost raised in The Venice of America.
I lived near Riverland Road and 36th Ave. on SW 22nd ST.
Please tell me you want to part with the rest of the moped.
BTW: A seat from a 1978 Puch Sport MKII would look nice on that bike.
I think there is a pic of one old Puch on my profile.
Thanks
Just checked and no pic on this profile but you can look through the gallery of mopeds on Moped Army - Swarm and Destroy, look for a 1978 Puch Sport MKII, the only moped with a long seat and mag wheels, I believe...
I would very much like to attempt to acquire that moped!
I was born and almost raised in The Venice of America.
I lived near Riverland Road and 36th Ave.
on SW 22nd ST.Please tell me you want to part with the rest of the moped.
BTW: A seat from a 1978 Puch Sport MKII would look nice on that bike.
I think there is a pic of one old Puch on my profile.
Thanks
Just checked and no pic on this profile but you can look through the gallery of mopeds on Moped Army - Swarm and Destroy, look for a 1978 Puch Sport MKII, the only moped with a long seat and mag wheels, I believe...
Last edited:
My friend in Gainesville just moved into a new place, he did some yard work in the backyard and ended up finding this little beauty after he cut back a vine that had been covering it. It's a 1977 Cimatti, only has 1,000 miles on the odometer, it's probably been sitting since 1978, heh.
I took the headlight with integrated speedometer and made a mount out of some aluminum yesterday:
would your friend consider selling the tank off of that moped?
