Performance CDI

hsvmick said:
did you find time to get a quote for postage to me in tasmania cheers
Click to expand...

USPS flat rate international looks like it's just about $25 which is WAY better than the fedex calculated quote of $110. Still need to verify that at the post office before I know for sure.
 
Update: for those not in the USA, shipping will be separate and added to the price, I will have to see who has the best rates and will quote you before any payments are made.


As of right now i'm just waiting on the parts, all of which are in the mail. hoping on a few more weeks to receive but china can be known to take a lonnggg while.


ALSO:*Ill be supplying just the built boards*, no enclosure or ignition coil.
If i can find some cheap enclosures ill further update this, but the one i'm personally using was $6 (aluminum), i'm sure plastic is cheaper. If i can find them in store (haven't checked radioshack yet)
Just made a board with my spare parts and it took just shy of 2 hours beginning to finish. I'm sure they'll go a bit faster if i do it production line style...but i still go over them piece by piece at least 3-4 times to make sure everything is perfectly correct.


PRICING:
~Built board, ready to go (no enclosure or ignition coil) $20 shipped to usa (out of country covers cost difference in shipping, quotes will be send once boards are all completed and ready to be shipped)
~Parts package (everything to build your own board, each resistor labeled, no instructions, no enclosure or ignition coil) $13 shipped to usa (out of country covers cost difference in shipping, quotes will be send once parts are in my hand and ready to be shipped)
 
Last edited:
I got a JAG but my son wants one. We in. I'll never go back to stock. Let us know when complete and ready to ship .
 
chevelle454 said:
any update on when the parts are coming? also if you could post a pic or two of the finished boards, that would be great
Click to expand...
Just waiting on the:
Jumper shunts, should be here tomorrow
Pins for jumpers, estimated delivery 9th-25th
Capacitors, Estimated delivery 2nd-11th
boards, estimated delivery 5th-23rd

Already received large capacitors from china, and everything else arrived from mouser a few days ago.

When everything arrives and i build 1 pics will be put up for your viewing pleasure

Legwon said:
and dimension for future enclosures :)
Click to expand...

boards are 5x7 cm :)



Ill be making a list for those interested below...
 
1) maniac57
2) chevelle454
3) fx-2
4/5) hsvmick (Australia)
6) nostyle
7) jimmymc2286
8) Legwon (Canada)



If you're not on the list and am interested, simply copy it, add your name and repost

Cheers!
 
Last edited:
1) maniac57
2) chevelle454
3) fx-2
4/5) hsvmick (Australia)
6) nostyle
7) jimmymc2286
8) Legwon (Canada)
9) Huffydavidson
10) Mountain 80(Canada) 1 completed board AND 1 parts kit

I am interested in 1 complete board and 1 parts kit for me and my buddy ! Do you have a pic of the finished board yet?? My Jag unit died and when I took it to my electrical buddy he said the layout was atrocious and not tidy at all from an electrical perspective.
 
Last edited:
IMG_20130407_095728.jpg

Hey guys and gals... I was hoping to get you guys input,. Would i be able to use this CDI on my bike's 66 cc motor I got it off of a four cylinder outboard w/12 volt ignition & there were 4 of these one for each cylinder.
It should work right? It has the same wire set up as stock CDI a power wire a ground wire and a plug wire. It should put out the same if not a more consistent voltage correct?
 
Last edited:
Jumpa said:
View attachment 58302

Hey guys and gals... I was hoping to get you guys input,. Would i be able to use this CDI on my bike's 66 cc motor I got it off of a four cylinder outboard w/12 volt ignition & there were 4 of these one for each cylinder.
It should work right? It has the same wire set up as stock CDI a power wire a ground wire and a plug wire. It should put out the same if not a more consistent voltage correct?
Click to expand...

Looks like you may have posted in the wrong area.
Question can be better answered if re posted under the lighting and electrical section, unless someone from this thread knows? I personally am not sure
 
`i didn't think i posted it here i thought i posted it in take a tip leave a tip during a discussion , on CDI's
 
`i didn't think i posted it here i thought i posted it in take a tip leave a tip during a discussion , on CDI's
can an admin or moderator move this post for me?
 
1) maniac57
2) chevelle454
3) fx-2
4/5) hsvmick (Australia)
6) nostyle
7) jimmymc2286
8) Legwon (Canada)
9) Huffydavidson

I have to hold off my cdi so I have returned the list as it was.

Sorry for any inconvience.
 
voltage/ohms play into this. ht is 6v so... maybe someone can help but i'd say no. but im no cdi expert. unlike the 50's their are lots of different coils now.
 
You must log in or register to reply here.
Back
Top