OCC Stingray Chopper lights

D

deepblue

New Member
Anyone know of a good way to wire on a light kit? I have blinkers, tail/brake lights and headlights, as well as switch handles to activate them, but I ran into a snag with the blinkers because the handles don't make them blink, just turn them off and on, any suggestions? I can't find much about people putting lights on these things...
 
if you have a china 2 stroke engine, don't hook the lights to the white wire from the engine.
you're engine won't run because the lights will steal power from the magneto which will decrease the power going to the cdi and give you a spark so weak, that the engine won't even run.
 
dragray said:
if you have a china 2 stroke engine, don't hook the lights to the white wire from the engine.
you're engine won't run because the lights will steal power from the magneto which will decrease the power going to the cdi and give you a spark so weak, that the engine won't even run.
Click to expand...

all true however using the white wire to power charger,to battery,to power lights will not. ive used the magneto charger sold by creative creations as well as the 6 volt generator/stator also sold by cc.with no draw from cdi.they also have 12 volt systems. as far as blinkers not blinking only turning on may need to wire in flasher relay,not sure as ive not had such a prob on bike.but needed new one on car.
 
I do have a 12v battery mounted on the bike, so powering it isn't my problem, I just bought a set of brake/clutch levers with light switches that were for a scooter and realized I need to make the blinkers blink still... Also need some way to activate the brake light when I pull the lever if anyone has any suggestions.
 
Deep blue

post pics of the parts you have so we can help you with a wiring diagram and any more parts you might need
 
You must log in or register to reply here.
Back
Top