No spark no start

Discussion in 'Norm's 2 stroke repair center' started by Ripdime32, Mar 2, 2017.

  1. Ripdime32

    Ripdime32 New Member

    Joined:
    Mar 2, 2017
    Messages:
    3
    Likes Received:
    0
    Hey there. I have an 80/66 cc 2 stroke engine with a no spark problem. I have replaced my magneto and spark plug and even got an hd lightning cdi. Still no spark. Gap is at .025 on spark plug. Readings on ohm meter are consistent with a good ignition system. Im stumped and a little outside help is needed.
     
  2. Chaz

    Chaz Active Member

    Joined:
    Jun 3, 2012
    Messages:
    910
    Likes Received:
    36
    Have you tried the stock cdi?

    Try bypassing the kill switch.
     
  3. Tyler6357

    Tyler6357 Member

    Joined:
    Mar 15, 2012
    Messages:
    803
    Likes Received:
    10
  4. Ripdime32

    Ripdime32 New Member

    Joined:
    Mar 2, 2017
    Messages:
    3
    Likes Received:
    0
    The stock cdi was no good out of the box. It was reading too much resistance. Thats why i bought the hd lightning cdi. Killswitch is disconnected btw. No change.
     

Share This Page