nirve chopper
- Thread starter oldmanpaintball
- Start date
Bikeguy Joe
Godfather of Motorized Bicycles
I dunno, but I like it.
xPosTech
The Old Master Motorized Bicycle Builder
I like it too. And sorry I'm really bad at appraising values. It's cost me a lot over the years.
The engine seems to have an ever so slight lean (3rd pic) to the left.
That looks like a very solid mount. Possibly the jig shifted when notching or welding the mount bar to the down tube/seat tube? Or when fitting the short tubes to the mount bar?
Even not perfect, I like that mount! Seems adaptable to other (read GX50) engines, too.
Ted
The engine seems to have an ever so slight lean (3rd pic) to the left.
That looks like a very solid mount. Possibly the jig shifted when notching or welding the mount bar to the down tube/seat tube? Or when fitting the short tubes to the mount bar?
Even not perfect, I like that mount! Seems adaptable to other (read GX50) engines, too.
Ted
oldmanpaintball
New Member
its slightly off to the left so i can add a wider tire later on . well the nirve cannibal retails 600
well, if you paid 600.00 for the bike then take that, plus the cost of the kit, aobut 100.00 for the custom tank....I'd say no more than 1200.00 obo but I'd have a hard time taking less that 1000.00
Tinker4
New Member
That's a nice build. However you have to take into account that the bike is now used and only worth about $300 same for the engine. Add the nice custom tank you built the whole thing is prob. worth between $600 and $700 dollars. Of course you have alot more into it because you built it. But to sell it your not going to be able to get what you have put into it. Don't get me wrong what you have done with it is a work of Art and truly cool.
Goat Herder
Gutter Rider
Looks very nice we don't have enough custume tanks on this chinas. great job!
JD Hog Moto-Cycles
New Member
Why did you go with the thin tire on the rear, did you have problems with the sprocket or the chain clearance or...
by offsetting the motor slightly does that solve all clearance issues with the chain on the fat 3 inch tire
i am about to build one myself
I could really use some close up pictures of the simplest method, the ones on venice beach site is perfect but cant get a close up view of the nirve bike in the pics
Id say its worth a g note
by offsetting the motor slightly does that solve all clearance issues with the chain on the fat 3 inch tire
i am about to build one myself
I could really use some close up pictures of the simplest method, the ones on venice beach site is perfect but cant get a close up view of the nirve bike in the pics
Id say its worth a g note
Last edited:
oldmanpaintball
New Member
i plan to put back the fat tire that is why i mounted the motor that way . its on hold for now . i have to get the adapter first
Venice Motor Bikes
Custom Builder / Dealer/Los Angeles
I put several good pics of the Venice Switchblade motor mounts on it's thread...
Here's the link... http://motorbicycling.com/f15/venice-switchblade-4649.html
If you have any questions, just ask me.
Last edited:
jimmybking
New Member
my mom told me i should sell the bikes i make but ive seen one place sell them for five hundred or so and not selling a lot of them, or any. are you going to sell it? if so let us know how much you get.
Goat Herder
Gutter Rider
Say you could totally market custom tanks on this forum!!!
A lot of folks need something custom but can't weld...
A lot of folks need something custom but can't weld...
outlawchopper
New Member
if the bike gos for 600 thin you add the kit and the Custom tank and the man hours you coud git like 1000 + for it you just have to find the right buyer nice bike keep it up