I got this new cylinder for the 66 and it has open transfer ports also a split exhaust port ,...so what's up with the new style cylinders are they worth the buy does open transfers make a difference if so what's the get down ?anybody got anything?
Also could be axle setback that can cause sway, for every foot of bed the axle should have 1" setback past center........CurtYes the 38mm & 40mm crank is what throws things off for both the buyer and vendor.
My little tag along was purchased on line & has served me well but I really need to build a wider track trailer using 20" bike tires on higher axle mounts to lower the center of gravity. The current one has to be pulled under 20mph because of the crappy midget tires and cornering at a walk when loaded. Easy build just never seem to take the time or put in the effort!
Rick C.
Thanks Curtis that is helpful information you've shared!Also could be axle setback that can cause sway, for every foot of bed the axle should have 1" setback past center........Curt
Welcome, lot of people don't know that, same rule for double axle, taken from the center of the two axles...........CurtThanks Curtis that is helpful information you've shared!