Hemi Hawthorne

GoldenMotor.com

MotoMagz

Well-Known Member
Aug 2, 2010
1,817
1,154
113
Michigan
My bike was built for a motor. It is all Dom ...stays are 3/4 tubing all I can remember about head tube is it had to be milled to except a bearing cup.
 

MotoMagz

Well-Known Member
Aug 2, 2010
1,817
1,154
113
Michigan
Little update....once I laced my 90mm rear drum I had a issue mounting my sheave.Problem was spoke alignment was off and would not accept Whizzer mounting hardware. It happened because I used longer spokes ..and once I twisted the hub to finish lacing the spokes were off. So I had to make my own and I chose Impact-Resistant UHMW Polyethylene and I also made spacers out of the same material.mSpacers were used to push sheave out so belt will clear 3" wide tires.Here is a photo of one of the UHMW mounts and how it worked out. Also where the bike s at...almost there!
 

Attachments

MotoMagz

Well-Known Member
Aug 2, 2010
1,817
1,154
113
Michigan
Well it's about done...need to connect front and rear lights. The 212 has new springs,header,aluminum flywheel w/8 degree timing advance,custom intake and a Real Mikuni vm22-133.
 

Attachments

Gbrebes

Well-Known Member
Jul 16, 2010
656
260
63
Los angeles
The bike is looking really cool Motomagz. I like the offset headlight mounting.

Have you got a chance to ride it much?

I am curious as to how the belt tensioner is working out on your secondary belt.

Looking forward to a video of your machine in action.

Gilbert
 

MEASURE TWICE

Well-Known Member
Jul 13, 2010
2,775
1,274
113
CA
Very nice. Let us know when you have a test ride done! I see a cogged type AX belt for the sheave. What diameter is the small pulley on the jackshaft that connects with sheave?

MT
 

MotoMagz

Well-Known Member
Aug 2, 2010
1,817
1,154
113
Michigan
Answer a few questions here,Measure Twice the pulley is 1 1/2" . GBrebes my maiden voyage was at The Portland Motor bike show.Racie and I did 18-20 miles no problem. I never really jumped on it till recently. Well once at Portland from a dead stop burned rubber about a foot..lol ? The tensioner is working great.It goes up and down with the pull of the cvt. Very happy with the bike and thanks for all the kind words!
 

curtisfox

Well-Known Member
Dec 29, 2008
6,082
4,056
113
minesota
Looking AWESOME! Bet the all belt is quiet, I like the hole profile. How long is the intake manifold?.............Curt