Fuel hose question

1

13b

New Member
I need a new fuel hose for my Grubee 48cc.

Does anyone know what I should ask for specifically at the auto parts store? There's an Advance Auto near my house and I was going to try there first. The stock hose is getting brittle.
 
13b said:
I need a new fuel hose for my Grubee 48cc.

Does anyone know what I should ask for specifically at the auto parts store? There's an Advance Auto near my house and I was going to try there first. The stock hose is getting brittle.
Click to expand...

Fuel line! or Fuel Hose!

They won't have clear, but get 1/4" from tank to filter and 3/16" or 5/32" from filter to carb. It must be fuel specific hose.
 
I just swapped mine out with some good stuff. I asked for 1/4" fuel hose at the parts store. I had to trim it to fit at the carb. It would have fit by itself but there was no room to clamp it. Eventually I'll do what Pablo said and get a smaller diameter for the filter -> carb connection.
 
i go to the hardware store and buy a few lengths 1-2ft of diffrent sizes(i like clear) there only like 99cents a foot,it doesnt matter to me what the hose is used for as i replace it every once in a while.and i dont use clamps and no leaks. also i dont use a inline filter just the tank one. but since i use a smaller diameter hose thers no more air in the line at all and it flows better too.
 
5/16" fuel hose.. get good stuff, as the plastic stuff that you get at the hardware is not safe for use as gas line, it gets hard and brittle... but there is clear hose that is safe for gas.. go to motorcycle shop to find it. auto parts stores may be able to get it but it's really stuff you find kids putting on ther ATV's and dirt bikes
 
Hobby shops that deal in model airplanes, especially the big 1/4 scale type will have the right size silicone, gasoline resistant hose. They sell it by the foot. Be sure to tell them it is for gasoline. They also have fuel line for model airplane fuel that won't stand up to gas. The silicone hose will not harden and is very flexible.
Tom
 
2door said:
Hobby shops that deal in model airplanes, especially the big 1/4 scale type will have the right size silicone, gasoline resistant hose. They sell it by the foot. Be sure to tell them it is for gasoline. They also have fuel line for model airplane fuel that won't stand up to gas. The silicone hose will not harden and is very flexible.
Tom
Click to expand...

that's the stuff I'm thinking of.. I know motorcycle shops have it too, and even places like Speedway Motors - Street Rod Parts, Race Parts, Ford Flathead Parts, Sprint and Midget Racing Parts, Pedal Car Parts sells the red cool looking hose, just in sizes too big for the little engines
 
Tygon F-4040-A Fuel and Lubricant Tubing. 3/16" I.D. ( it stretches and makes a nice tight fit) U V resistent, flexible and very durable.
 
Yeah I see that site has a minimum order of like 10 rolls or something. Sorry I haven't been more helpful on where to get it.
 
Junster,
The model airplane fuel line is Tygon. It might be cheaper at a small engine shop; hobby shops seem to always charge more for stuff.
Tom
 
the fuel line that comes in a kit is usually surgical tubing.
a good medical supply store here has it (take a sample from a kit).

LOWES hardware has the perfect size for 18 cents a foot but is less flexable and will harden in a couple of months.... it will work fine 'till you find the good stuff.

stay dry
gubba
 
You must log in or register to reply here.
Back
Top