Can u name this part? grubee skyyhawk 66/80cc engine kit

[Buffaloson]

So i need to figure out the name of this part and where to buy it. After removing the plate covering the engine sprocket, its a small round stud that pokes out from the middle of the sprocket, and has something to do with connecting the clutch to the engine. My rents moved the bike while i was working on it and it was lost. Any help is appreciated, i searched everywhere online trying to find one, and if i cant find it, my bike will be useless

 

[Hot Wheels]

I'm not sure if anybody sells that part, I would think you could by a metal rod that dia. and cut it to size. Also behind that pin there is a ball bearing that probably rolled out when your bike was moved.

 

[Hot Wheels]

you part 26 and the ball bearing is part 24. maybe you can ask in this forum if anybody has a blown motor you could buy the parts you need to get on the road.

 

[Buffaloson]

wow thank you so much, i never expected such a quick and helpful response!

 

[the_edge150]

try this: Clutch Repair Kit (Parts #1-3,6-13,18-21,26,) - $29.99

 

[bseelbach]

Dax has them but is out of stock.
You might give him a Duane to see when they will be in.
The part is $5, shipping is $9 per order.
ENGINE_KIT_PARTS_PAGE_3

 

[Venice Motor Bikes]

I once made one from a screwdriver shaft. (it worked perfect!)

 

[Cabinfever1977]

clutch rod = L 26.20mm/ dia 7.92mm
clutch ball bearing = dia 7.92

maybe you can make a rod yourself now that you know the size and you probally can find the bearing at a hardware store.