broken gasket

[MrLarkins]

now what?

i was very gingerly cutting the gasket opening wider (to match the port exhaust) and the darn thing ripped right where I had it clamped!

now what?

 

[NunyaBidness]

new gasket
at any auto parts store, you might have to cut one out of some stock material.

 

[Dave31]

You can pick up some gasket maker at a local auto parts store and make a new one.

 

[Pablo]

now what?

i was very gingerly cutting the gasket opening wider (to match the port exhaust) and the darn thing ripped right where I had it clamped!

now what?

Waste o' time messing with an old gasket. Get some HD Mr. Gasket re-inforced exhaust gasket material (well stocked auto parts place or speed shop)

 

[jasonh]

... What they said

 

[misteright1_99]

Or search for EGR Valve gasket. They are metal and hold up to the heat. I have seen posts with part numbers. But I would still get the gasket material, youll need it...

 

[Dave31]

Or search for EGR Valve gasket. They are metal and hold up to the heat. I have seen posts with part numbers. But I would still get the gasket material, youll need it...

Thank's for reminding me That was my post and some said it does not fit It work's fine for me...I need to take some pic's of that to set the record straight....Maybe just a little difference in motor's

 

[Norman]

Mr larkin PM me your address and I'll send you a good exhaust gasket or two for a couple of bucks. I make mine out of high temp gasket material that can also be used for head gaskets.

 

[Skyliner70cc]

I've got 1/2 dozen of those pesky gaskets at my house.