Bianchi Milano 4 stroke shift build

Terry Blow said:
MaxPower
I just thought of one more thing the shift kit that SBP has developed is for 2.5hp the Super Titan has 3hp that may be to much power for the free wheel so that is something that may need to be upgraded if that is possible
Click to expand...
Really, can you prove that the Super Titan makes 3 HP?
Dax never came up with any evidence of how his Super Titan made a half horsepower more than the regular Titan which is just a Huasheng with his sticker on it.

Titans, Huashengs and the GX Honda all make around 2 HP or less in the real world
 
BiMoPed said:
Really, can you prove that the Super Titan makes 3 HP?
Click to expand...

I've questioned that too but we'll just have to trust dax. Even if a video was made with both the super titan and titan hooked up to dyno you would still have to trust that the results weren't tampered with.
 
MaxPower said:
I've questioned that too but we'll just have to trust dax. Even if a video was made with both the super titan and titan hooked up to dyno you would still have to trust that the results weren't tampered with.
Click to expand...
Dax said the Super Titan made half HP more with better porting and higher compression.
That should be easy to prove.

http://motorbicycling.com/f23/super-titan-here-now-24638.html

thatsdax said:
Hi skyl4rk ,
Porting is better and compression is bumped up. Also has additional oiling grooves. I can tell you this.. It will out run HONDA GXH50. Super Titan is Super !!! Enjoy the ride..
Click to expand...
 
Last edited:
here's the latest from terry;

OK
1. Looks like my supplier is only going to bring in 5/8 shaft engines and kits I will ask if they are going to bring any tappered shaft in. It may end up that the only tapered shaft for sale with have to come from thatsdax.
2. Supplier is not bringing The 4G for tappered shaft in but they did say they where going to get parts for them so I will have to ask about this as well
3.The shift kit is $190 and $15 shipping
I will email you what I find out tomorrow
 
MaxPower said:
here's the latest from terry;

OK
1. Looks like my supplier is only going to bring in 5/8 shaft engines and kits I will ask if they are going to bring any tappered shaft in. It may end up that the only tapered shaft for sale with have to come from thatsdax.
2. Supplier is not bringing The 4G for tappered shaft in but they did say they where going to get parts for them so I will have to ask about this as well
3.The shift kit is $190 and $15 shipping
I will email you what I find out tomorrow
Click to expand...

The tapperd shaft 4G is not coming... only the 5/8.
 
HI,

We looked into making a crankshaft extension to adapt the tapered shaft motors to
5/8" to use with the Q-Matic drive, however the majority of suppliers have decided to drop the tapered shaft motor from their product line. Due to small quanities of the tapered shaft motors, we cancelled our plans to make the adapter.

I think issues with the small tapered clutch and the lack of a flywheel key prompted many to switch back to the 5/8" shaft.

Have fun,
 
Last edited:
o poo..... I don't know what I want to do now. I wish the 5/8" 4g wasn't s***. Maybe I should go with a 2-stroke shift kit. Are the new 5/8" 4g's redesigned or the same crappy bushing design? at least the one way bearing problem was taken care of.
 
MaxPower said:
o poo..... I don't know what I want to do now. I wish the 5/8" 4g wasn't s***. Maybe I should go with a 2-stroke shift kit. Are the new 5/8" 4g's redesigned or the same crappy bushing design? at least the one way bearing problem was taken care of.
Click to expand...

Hi Max
I have been told that all the issues with the earlier 5/8 4G's have been address but they will still be using the CC bushing. They have done something to improve it I can't tell you what they have done, just that they have done something I wish I knew more
Terry
 
MaxPower said:
March 1, still no 4g for me :(
Click to expand...

Hey Max
I just got off the phone with my supplier and it is going to be the end of March or longer. And they are NOT even getting enough parts to make up a 5:1 ratio 4G.
Sorry for the bad news
Terry
 
Max
I know this makes no difference to you right now but I have a new supplier he has made an order with Grubee inc. for the 5:1 ratio 4G but they are 3 months or more away. So the 5:1 will be here once again, that is the only good news I have I wish I could do better.
Terry
 
Terry Blow said:
Hey ocscully
You need to look a little closer at that add they are sold out and have been for some time.
Nice try though
Terry
Click to expand...

You may be right Terry but I still don't see where it says that they are sold out or out of stock on the page I've provided a link too?

ocscully
 
Waiting for a kit is killing me. I doubt the bike will be done before 4/16. No way I'll have it broke in by then. I think It will be worth the wait though. Anyone have experience with the diaphragm type carburetor for the HS engine?
 
You must log in or register to reply here.
Back
Top