3D printed in-frame plastic gas tanks

KCvale

KCvale

Well-Known Member
I am a couple of months into creating a 3D CAD file to make plastic gas tanks that fit common beach cruiser bikes frames, have the base design .STL file and sent it to this Purple Porcupine rapid prototyping service and got this quote back to make 1 gas worthy gas tank to fit a 29" Macargi.

tankQuote.jpg


So much for prototyping with the right material.

$6,816.78 to print out one tank.
Total does not include tax and shipping.

I guess I shouldn't have said I was from NASA? hehe ;-}
 
That price isn't bad...after all the tooling is done the product price is cheap.Just the start up cost is what stops people really quick! Its very hard to get that start up cost back and then make any profit.
 
Those are so cool I saw a car they built with a huge 3d printer.$600 that's cheap for what they can do.
 
Likely a big difference between the quoted part and what can be made on those little machines. The printer max space is 7.8" square meaning you'd have to print the tank in sections and glue them together. Not the end of the world but worth noting. The resolution of the $600 printer is nominal .010" with layer thickness at .020". Plan on spending some time with solvent and sand paper to get a smooth finish. I'm not at all sure about the material specs and compatibility with fuel but again worth noting in the price.
 
Rudz said:
Can you sell a hundred tanks at 70 bucks each? Maybe, but it will take a while.
Click to expand...

That's a great point, Rudz. And that's at prototype costs.

==========================================

Guessing the potential customers are, for the sake of discussion 100,000 globally.

That makes the break even point .001 of the market/sales.

Even half that to be properly conservative is a really promising projection.

But projections are just day dreams with supporting documentation. LOL, or the "Executive Summery" in a business plan......
 
MotoMagz said:
That price isn't bad...after all the tooling is done the product price is cheap.Just the start up cost is what stops people really quick! Its very hard to get that start up cost back and then make any profit.
Click to expand...
That's just it, there is no tooling in 3D printing, I am supplying the .STL CAD file of printing instructions.

The expensive part is the material, there are only a couple of Polyethylene plastic (HDPE, MDPE) that get a B grade for gas and
STRATASYS says PPSF / PPSU (Polyphenylsulfone) is the gasoline-resistant 3D-printing medium you need:

http://www.stratasys.com/~/media/Main/Secure/White Papers/Rebranded/SSYS-WP-Thermoplastics-03-13.pdf (scroll down to the last material)

That means a special large 3D printer to handle it and apparently it's not cheap.

I do have the option to have a mold made from the .STL and then have them injection molded, but again I'd need to make to make a couple hundred just to break even.
 
Imthegrt1 said:
Sounds like a great idea seems like it should sell.
Click to expand...
All I care to do is sell enough to cover development costs and have a supply for my own builds.

I am playing with some templates for something I can do in metal for flat base pieces and then see what I can do to soften the lines to fit the beach cruisers flowing lines.
 
Apparently not cheap would be an understatement compared to the prototype you were quoted. We have one of the small Mojo printers in our office capable of printing with the ABSplus material. It is a demo unit and was about $10K.
 
You can find local 3d printers who would make this type of project for a fraction of that quoted cost. I found a few printers on Craigslist but I have never designed anything like this so I would have to pay for the designing too.
 
The other solution is to make fibreglass tanks in two halves. The initial cost would be fairly low, but then it becomes labour intensive after that, and that costs money if someone else is doing the work for you.

As a money making hobby, though, it would get you out of the house and into the workshop.
 
I keep getting reminded of things. Blow moulding is one. You can have lots of shapes, but the surface finish is never very good. What about a simple, perhaps ready made, tank and a separate cover, styled to suit different frames?

Tank-Grouping.jpg
 
joey1320 said:
You can find local 3d printers who would make this type of project for a fraction of that quoted cost.
Click to expand...
Well ya, $6,800 to print out one tank is beyond outrageous.

I am waiting on a quote from another local guy that does form and roll molding as well as dip molding but then there is the tooling for the mold.

Now I can see paying $1-2K for tooling a mold good for 100 units or so, but that's another rub, how long the mold will last, they can be made from many different substances from 1 time use to hundreds of uses to thousands of uses each costing more because of the material it is made of and the cost to tool it.

More as I learn more as this is all new to me.
 
You must log in or register to reply here.
Back
Top