I got the piston to move a bit, but it only moves when it's in the up position. As soon as it goes back down, something makes it grind to a halt. I also noticed a dent on the bottom, maybe it was dropped and damaged then?
Engine Locks When Clutch Lever Is Released
- Thread starter LBurdick43
- Start date
on stuck rings in general:
perhaps it's the transfer port then, but I've seen them stick them like that - had to take out studs to turn barrel to get it off, so not sure where they were stuck
on current motor:
if it were dropped, you should try for a refund before taking more apart - a damaged case, might be unrepairable
perhaps it's the transfer port then, but I've seen them stick them like that - had to take out studs to turn barrel to get it off, so not sure where they were stuck
on current motor:
if it were dropped, you should try for a refund before taking more apart - a damaged case, might be unrepairable
Last edited:
Who did you buy it from?
This is unacceptable for a new motor no matter what the problem is
as long as you didn't cause the problem.
Get an exchange or refund from your seller.
This is unacceptable for a new motor no matter what the problem is
as long as you didn't cause the problem.
Get an exchange or refund from your seller.
I bought it from BHTEC-Motor on Amazon, at the moment I'm trying to see if I can exchange the engine because there isn't anything else I can do, unfortunately.
most important part of purchase - the way these are assembled and handled during shipping, I've see really weird stuff arrive
got one once with whole top end on backwards with intake at the front
Ive seen a brand new engine with the cylinder mounted backwards, and another brand new engine with 2 base gaskets under the cylinder!
With quality control like that, it makes me wonder about internals, and tolerances!
Good to hear that the seller is accepting a exchange, and hope it all gets sorted out!
With quality control like that, it makes me wonder about internals, and tolerances!
Good to hear that the seller is accepting a exchange, and hope it all gets sorted out!
Do you have to send the defective motor back?
Pull that sucker apart to figure out what the problem was.
They're actually letting me keep it! Great for spare parts, at least for what functions. I do plan on figuring out exactly what was wrong though. Who knows, maybe it's fixable, and then I'll have two.