Don't panic!CRAP, I have been looking forward to this race/meet up but shift kit has separated from motor. One of the two bolts attaching them stripped the motor mount. SO.... NO IDEEA WHAT TO DO. I heard replacing crank case is quite hard, HELPPPP MEE!!!!
that's wright -some lock tight tooDon't panic!
No need to replace the crankcase.
Do you have a 1/4" x 20 tap?
Replace the 6 mm bolts with 1/4 -20 bolts.
If the 6mm bolts holes are not too badly stripped out all you
need to do is run a 1/4 20 tap in to make new threads.
1/4 - 20 is just a bit bigger than 6 mm so the hole doesn't need
to be drilled first.
Another option is using a heli coil insert.
Give me a call and if you bring the case over today ONLY I will
retap it for you.
Please email me at [email protected]
to Register for the Saturday Oct 22nd Grange Race.
Please put your Race Number and Forum Name as the
email subject so I know who you are.
Copy and paste the questions below.
1) Forum name.
2) Real name.
3) Race number from Willow Springs if you had one.
( You can pick a number if you don't have one )
4) What type of bike / class / engine are you riding?
5) Are you arriving Friday or Saturday?
If on Friday do you want to practice on the track?
( $20 cost if there are at least 10 riders ) $30 reg price.
6) How many people, spectators or pit crew are coming with you?
$10 each paid at the track gate.
7) Are you racing in 2 classes?
What bike / class types?
=============================
If you are coming as a spectator I would appreciate an email
too so I can plan for the event.
Thanks.
Race numbers available, Safety gear, Directions etc.
Thanks for the help and offer.Don't panic!
No need to replace the crankcase.
Do you have a 1/4" x 20 tap?
Replace the 6 mm bolts with 1/4 -20 bolts.
If the 6mm bolts holes are not too badly stripped out all you
need to do is run a 1/4 20 tap in to make new threads.
1/4 - 20 is just a bit bigger than 6 mm so the hole doesn't need
to be drilled first.
Another option is using a heli coil insert.
Give me a call and if you bring the case over today ONLY I will
retap it for you.
I hope you got my check today. I sent it out on Friday.Only a few people have signed up......
I guess no one is coming.........
Everyone riding on the track who does not email me and
pre register will be paying $5 more at the track.
Ends on Thursday night because I will be travelling to the track on Friday with no internet.When does preregister end?
Everyone pays at the track gate house on Sat. Thanks to you guys that already paid.How do we prepay?
All spectators, pit crew, or anyone who isn't riding on the track pays $10 at the gate.If someone drives the vehicle and is part of my pit crew only. They are not going to race or even ride on the track, do they have to pay an entry fee?
If someone shows up and wants to watch do they pay $10 at the gate?
How much is it to race Sat Oct.22 if we preregister?
Thanks! I got your check and one from scotto- too.I hope you got my check today. I sent it out on Friday.
some would out run you some will fall back but some will be at your pace and you'll mix it up with them it's fun -the people are nice and wont to talk about the MBs and stuff you'll learn first hand about how to make your motor run better -and you'll have faces and name to put with forum handles I'm going up Friday to camp out I'm ducedave #22 aka Dave I'm 6ft.tall gray hair and will be driving my friend 90ish Toyota miny truck I'm too color blind to tell you the color I some time ware a Viking helmet the horned typeI might want to go, but I'm afraid it wouldn't be worth it if all the other bikes would outrun my generic engine with stock muffler.
Thank you for that my safe travels see you homebuba here
okay duke i see your point MOZENRATH ???? GO FOR SURE
HAY
ANYONE FOLLOWING THIS EVENT GO TO GRANGE
I DID NOT IN ANYWAY MEAN TO DISCOURAGE ANYONE FROM GOING TO WATCH OR PARTICIPATE IT IS A COMPLETE BLAST FOR THE WHOLE FAMILY
AS WAS WILLOW AND I AM SURE ANY AND ALL SUCH EVENTS OR ACTIVITIES
SORRY FOR ANY MISUNDERSTANDING AND I WOULD BE THERE FOR SURE IF I COULD
BUBA