Machined Aluminum Spring-Loaded Chain-Tensioner
- Thread starter kipharley
- Start date
Haha, yup. I think I saw a replacement for 8 bucks or so.....not bad, but i bet it works just fine.
Wear a leather glove when you belt sand it or you wont be able to hold it evenly or at all for that matter.
Hey,Guy's it worked slicker than snot on a brass door knob!
What I did first was scribe a line 1/4" along the outside edge where I wanted to cut then with a band saw,I cut as close to the line as I could.
Then I just finished it to the line with my belt"grinder".
Worked great!! even brought the gear cover below the surface of the mag cover.you can use your supplied hardware and clutch pusher bar nooo-problem!So clearance isn't an issue...Kip.
[email protected]
What I did first was scribe a line 1/4" along the outside edge where I wanted to cut then with a band saw,I cut as close to the line as I could.
Then I just finished it to the line with my belt"grinder".
Worked great!! even brought the gear cover below the surface of the mag cover.you can use your supplied hardware and clutch pusher bar nooo-problem!So clearance isn't an issue...Kip.
[email protected]
Attachments
Thanks for the compliments.hurricane.I really appreciate it.Hope it comes in as handy as I think it will.Get's the junk away from the spokes!Kip.
[email protected]
[email protected]
Hi,Miked.The only stupid question is the question never asked! Sure the clutch arm works just like the tensioner wasn't there.Pirate Cycle's is gonna have some the first of next week! Kip.
[email protected]
[email protected]
Thanks's happycheapskate!Your encouragement and other's has motavated
me.
It's nice to know that I can offer another alternative to the supplied tensioner.
I'm not saying that it will work for everyone but's it's a nice option.
I'm also working on other projects that if they work out will knock your socks off!Future Threads Stay Tuned!! Kip.
[email protected]
me.
It's nice to know that I can offer another alternative to the supplied tensioner.
I'm not saying that it will work for everyone but's it's a nice option.
I'm also working on other projects that if they work out will knock your socks off!Future Threads Stay Tuned!! Kip.
[email protected]
Hi,All! First off I hope everyone has a happy and safe Thanksgiving!
Well yesterday I loaded up a bunch of tensioners in the truck and drove 2 hrs to Worcester,Mass.
To Meet Justin at Pirate Cycle's in person and hand deliver the first batch of tensioners.
I also met his brother Matt,a couple of class acts that know what they are talking about!
We hung out shooting the breese for a while and they gave me a tour.
Everywhere you turn there's something cool to look at.
There's a Felt Bultaco replica hanging on the wall with a worksman frame hanging behind it,there's a table full of sprockets and hub adapters with black powder coated worksman wheels next to that.
I looked at a bunch of sportscar Pat's stuff,Jim's stuff and so on and so on.
I could of spent hours. On the ride back I had a smile on my face the whole way,even though it took me an extra hr because of traffic.
I'm glad that I picked Pirate Cycle's to retail my tensioner's and happy that I met two stand-up guy's in the industry.
So Justin has the first batch of tensioners in the Pirate's Den and I'm sure he will hook you up even before he has them on his site!
Thank-You for your interest! Kip.
[email protected]
Well yesterday I loaded up a bunch of tensioners in the truck and drove 2 hrs to Worcester,Mass.
To Meet Justin at Pirate Cycle's in person and hand deliver the first batch of tensioners.
I also met his brother Matt,a couple of class acts that know what they are talking about!
We hung out shooting the breese for a while and they gave me a tour.
Everywhere you turn there's something cool to look at.
There's a Felt Bultaco replica hanging on the wall with a worksman frame hanging behind it,there's a table full of sprockets and hub adapters with black powder coated worksman wheels next to that.
I looked at a bunch of sportscar Pat's stuff,Jim's stuff and so on and so on.
I could of spent hours. On the ride back I had a smile on my face the whole way,even though it took me an extra hr because of traffic.
I'm glad that I picked Pirate Cycle's to retail my tensioner's and happy that I met two stand-up guy's in the industry.
So Justin has the first batch of tensioners in the Pirate's Den and I'm sure he will hook you up even before he has them on his site!
Thank-You for your interest! Kip.
[email protected]
I just got my Kip Springer in today and i must say that it is one good looking upgrade. I havent got to use it yet because the bike its going on is a project bike and will take me a few more weeks at least to finnish... I cant wait to test this thing out.
i will take some pics of it tonight
i will take some pics of it tonight
This is what im working with..
http://www.flickr.com/photos/zelchco/5225042174/ http://www.flickr.com/people/zelchco/,
http://www.flickr.com/photos/zelchco/5225053546/ http://www.flickr.com/people/zelchco/,
the only problem so far is that the bucking bar that came with mine was a lil to short. look at the arm position.
http://www.flickr.com/photos/zelchco/5224463263/ http://www.flickr.com/people/zelchco/,
http://www.flickr.com/photos/zelchco/5225133884/ http://www.flickr.com/people/zelchco/,
http://www.flickr.com/photos/zelchco/5224455277/ http://www.flickr.com/people/zelchco/,
im not mad at all just posting info.
http://www.flickr.com/photos/zelchco/5225042174/ http://www.flickr.com/people/zelchco/,
http://www.flickr.com/photos/zelchco/5225053546/ http://www.flickr.com/people/zelchco/,
the only problem so far is that the bucking bar that came with mine was a lil to short. look at the arm position.
http://www.flickr.com/photos/zelchco/5224463263/ http://www.flickr.com/people/zelchco/,
http://www.flickr.com/photos/zelchco/5225133884/ http://www.flickr.com/people/zelchco/,
http://www.flickr.com/photos/zelchco/5224455277/ http://www.flickr.com/people/zelchco/,
im not mad at all just posting info.
Not tryin to be rude but why are these things so expensive?
They look cool but 75$ is way to much for me. especially for a tensioner
Thanks for making them tho
hopefully someone needs it really bad.
Hey Kip I am interested.Quote me a price and I will hang one on my GT5 RAT MOTOR and let the people know how it works for me.Thanks allot and keep the rubber side down. Scooter325
Been a few months since someone posted here, but I saw these listed on pirate cycles earlier; however, they don't have any in supply.
I'm really in need of something like this, as the default tensioner doesn't sit too well on my bike.
Any chance at getting one of these for less than $75? That's a bit much, and I imagine your capable of putting them out more quickly by now. I've seen a few similar items for around $35, but I like this design more. A direct purchase from you to me, cutting out the reseller fees, would be nice.
I'm really in need of something like this, as the default tensioner doesn't sit too well on my bike.
Any chance at getting one of these for less than $75? That's a bit much, and I imagine your capable of putting them out more quickly by now. I've seen a few similar items for around $35, but I like this design more. A direct purchase from you to me, cutting out the reseller fees, would be nice.
Just think of how many china-kits it will outlast, so it could be seen as an investment (bike humor). 
Does this only work with the narrow chains? Since the mounting platform is sandwiched under the gear cover, it looks like you cannot use the fat chains.
Does this only work with the narrow chains? Since the mounting platform is sandwiched under the gear cover, it looks like you cannot use the fat chains.