nidyanazo
New Member
Last edited:
9.4 HP ONBOARD video ride; Morini engine road bike
- Thread starter nidyanazo
- Start date
nidyanazo
New Member
Re: Franco Morini 9.4hp road bike build *video intro
And you can see my motorbike designs and superbike riding vides, allong with my vfx work at my website OZANMEDIA- Santa Barbara, CA
I'll be posting video progress of the build as I go...
And you can see my motorbike designs and superbike riding vides, allong with my vfx work at my website OZANMEDIA- Santa Barbara, CA
I'll be posting video progress of the build as I go...
PutsTheDUIinRUINED
New Member
Re: Franco Morini 9.4hp road bike build *video intro
I love the render on the website.
I love the render on the website.
nidyanazo
New Member
Re: Franco Morini 9.4hp road bike build *video intro
Thanks mate! I love the vintage café look
this is a Norton Commando I built
And will be going for a similar look with my morini-bike
Got some progress done to the mounts, and am super excited! Will update with a video later this afternoon...
Thanks mate! I love the vintage café look
this is a Norton Commando I built
And will be going for a similar look with my morini-bike
Got some progress done to the mounts, and am super excited! Will update with a video later this afternoon...
nidyanazo
New Member
Easy Rider
Santa Cruz Scooter Works
Re: Franco Morini 9.4hp road bike build *video intro
Looks good! It should or I mean "will" be a rocket when your finished. It will a stock 50+mph bike with a 44 tooth rear sprocket. What's left to do on it because it almost looks ready to fire up. I just bought a 9.4 and replacing my 5.8 Morini that I plan on porting it and building it up with a stroker crank.
Keep up up dated!
Looks good! It should or I mean "will" be a rocket when your finished. It will a stock 50+mph bike with a 44 tooth rear sprocket. What's left to do on it because it almost looks ready to fire up. I just bought a 9.4 and replacing my 5.8 Morini that I plan on porting it and building it up with a stroker crank.
Keep up up dated!
nidyanazo
New Member
Re: Franco Morini 9.4hp road bike build *video intro
Thanks EZ!
Due to a shipping error I wont have the hub-drive adapter until next week. So lame.
But I did got the carb on and alligned, the throttle setup, and the ignition mounted.
I ordered a new welding helmet and respirator setup so when that comes in, I'll weld the mounts too.
Also, the pipe isn't here yet. Damn. And I'm using a goped tank until I can locate a suitable cafe Style tank.
How did you connect the fuel lines? I see your setup with the goped tank too.
I was wondering what to do with the 'extra' line coming from the tank, since the fuel line has a inline filter already on it.
I'm going to try out a 42T sprocket, see where that goes, I would really like excellent acceleration up to about 45mph. That's it.
Where did you source the stroker crank?
Will put up a new vid in a few hours...
Thanks EZ!
Due to a shipping error I wont have the hub-drive adapter until next week. So lame.
But I did got the carb on and alligned, the throttle setup, and the ignition mounted.
I ordered a new welding helmet and respirator setup so when that comes in, I'll weld the mounts too.
Also, the pipe isn't here yet. Damn. And I'm using a goped tank until I can locate a suitable cafe Style tank.
How did you connect the fuel lines? I see your setup with the goped tank too.
I was wondering what to do with the 'extra' line coming from the tank, since the fuel line has a inline filter already on it.
I'm going to try out a 42T sprocket, see where that goes, I would really like excellent acceleration up to about 45mph. That's it.
Where did you source the stroker crank?
Will put up a new vid in a few hours...
nidyanazo
New Member
NEAT TIMES
New Member
Re: Franco Morini 9.4hp road bike build *video intro
Nid,
Here Is A Pic Of The Tank That Came With My Used Morini And Of The Frame It Came Out Of. Not Sure What Hp It Is. The Exhaust Port (the Hole Looking At The Piston 1s 1 1/8" Id). The Wheel Rim`s Are Like 10" Dia Plus The Tire.
He Would Have Sent The Whole Frame For Cost Of Shipping, The Exhaust Would Have Been Nice
Nid,
Here Is A Pic Of The Tank That Came With My Used Morini And Of The Frame It Came Out Of. Not Sure What Hp It Is. The Exhaust Port (the Hole Looking At The Piston 1s 1 1/8" Id). The Wheel Rim`s Are Like 10" Dia Plus The Tire.
He Would Have Sent The Whole Frame For Cost Of Shipping, The Exhaust Would Have Been Nice
Attachments
nidyanazo
New Member
Re: Franco Morini 9.4hp road bike build *video intro
Thanks Fair!
I'm looking at these for wheels... Whatch guys think?
http://img257.imageshack.us/img257/8223/bikewheels.jpg
Thanks Fair!
I'm looking at these for wheels... Whatch guys think?
http://img257.imageshack.us/img257/8223/bikewheels.jpg
Jesse002100
Member
Re: Franco Morini 9.4hp road bike build *video intro
those rims are sexy... where are they from? and your bike is gunna rip!!
those rims are sexy... where are they from? and your bike is gunna rip!!
Goat Herder
Gutter Rider
Re: Franco Morini 9.4hp road bike build *video intro
Neat I saw that Motor again on another post. That thing is huge! when ya gonna put it on something.
Send it over my way I will stick it on somthing
Welcome to the forum nidyanazo! Keep us posted on the build looks exiting! Nothing quite like building one of these creations and taking that first ride! Nothing compares to that first thrill its addictive!
Neat I saw that Motor again on another post. That thing is huge! when ya gonna put it on something.
Send it over my way I will stick it on somthing
Welcome to the forum nidyanazo! Keep us posted on the build looks exiting! Nothing quite like building one of these creations and taking that first ride! Nothing compares to that first thrill its addictive!
Last edited:
NEAT TIMES
New Member
Re: Franco Morini 9.4hp road bike build *video intro
Goat
Recently Bought Another Stretch = 32 Spoke Wheels. The Other Has 68 Spoke And Did Not Want To Change Away From The 68 Wheels. Yesterday I See Pirate Has The Nice "mm" Special Sprocket Back In Stock. Cant Decide If I Want Shifter Kit Or Not. Going To Ask Fairracing 31 What He Thinks! Can`t Ask You As Your`s Is A Shifter. Ron
Goat
Recently Bought Another Stretch = 32 Spoke Wheels. The Other Has 68 Spoke And Did Not Want To Change Away From The 68 Wheels. Yesterday I See Pirate Has The Nice "mm" Special Sprocket Back In Stock. Cant Decide If I Want Shifter Kit Or Not. Going To Ask Fairracing 31 What He Thinks! Can`t Ask You As Your`s Is A Shifter. Ron
Goat Herder
Gutter Rider
Re: Franco Morini 9.4hp road bike build *video intro
Ya I am really enjoying the shifter Nuvinci set up with the Morini. How long it will last I will have to be the tester. I let you guys know. I think your motor probably has plenty of power Neat! Nidyanazo you will be riding soon enough exited for ya its gonna be fun!
Ya I am really enjoying the shifter Nuvinci set up with the Morini. How long it will last I will have to be the tester. I let you guys know. I think your motor probably has plenty of power Neat! Nidyanazo you will be riding soon enough exited for ya its gonna be fun!
nidyanazo
New Member
Re: Franco Morini 9.4hp road bike build *video intro
Hey Goat I was going to try a nuvinci with this bike (still want to if the damn fallbrook tech sales guy ever calls me back)
Reason I tried to contact them is if it could work backwards, then I'd put it on my wheel and run the chain to a sprocket.. But I havent seen any bikes with the nuvinci on the left side...
Do you know if it will work?
Hey Goat I was going to try a nuvinci with this bike (still want to if the damn fallbrook tech sales guy ever calls me back)
Reason I tried to contact them is if it could work backwards, then I'd put it on my wheel and run the chain to a sprocket.. But I havent seen any bikes with the nuvinci on the left side...
Do you know if it will work?