Ditto, PB Blaster is awesome stuff and it doesn't explode like WD-40the best penatraiting oil ive ever used was pb blaster....soak it in it....
Ditto, PB Blaster is awesome stuff and it doesn't explode like WD-40the best penatraiting oil ive ever used was pb blaster....soak it in it....
One time, I sprayed a boatload of WD-40 into the motor/bearings of an old shop vac I had. I put it back on the canister, and let it sit for 20 minutes.Ditto, PB Blaster is awesome stuff and it doesn't explode like WD-40
Another vote for PB Blaster- put in there, let it sit, tap all around the block (vibrates the liquid into tight places), put more in, let it st- work slow. Don't want to scar the bore more than necessary.the best penatraiting oil ive ever used was pb blaster....soak it in it....by the way it might be a blessing....they make bigger cranks and cams for these and ive built these to run alcohol...wapwap...funfun
LOL. Great story - sounds like something that I would have done!One time, I sprayed a boatload of WD-40 into the motor/bearings of an old shop vac I had. I put it back on the canister, and let it sit for 20 minutes.
When I turned it on- BOOM! It blew the top right off and dust, crud, and more crud blew every where! Not to mention the fireball, which was spectacular.
Bah, I got that beat.One time, I sprayed a boatload of WD-40 into the motor/bearings of an old shop vac I had. I put it back on the canister, and let it sit for 20 minutes.
When I turned it on- BOOM! It blew the top right off and dust, crud, and more crud blew every where! Not to mention the fireball, which was spectacular.
not planning on making it move far that way the piston has some rust around the cylinder wallTapping on the head sounds scary. If the piston won't move and you make it move Scratches on the bore are gonna be worse. Sounds like you gave it lots of lube and let it set. My plan would be to use heat around the cylinder with a propane torch . Keep the lube coming try working it free with patients.