What am I going to need?

[Lastknownwolf95]

Ok I have been using a headlamp zipped tied to my handle bars for a while now, I think it time to add a headlights, turn signal, ect I can't find anything on what I need or how to set it up. If someone could help that would be wonder full

My bike is a after market brand 80cc motor on a schwinn stingray frame
Not sure if that helps any

I want to do at least a 12v system but I have no idea what I need or how to set it up

Like i said if anyone can point me i the right direction i would really appreciate it thank you

 

[Bikeguy Joe]

From another thread-
"why not consider fitting a rechargeable wireless system like that made by Meilan? I just installed one on my latest e-build. So simple install. Light unit installs to rear of seat tube, 4-button control pad mounts on handlebars. Job done. Also fitted a separate momentum brake light. No wiring whatsoever. There's already more than enough wiring to deal with on an e-bike..."

 

[Venice Motor Bikes]

This guy makes a very nice light kit for motorized bicycles...

https://www.facebook.com/Verybrightbicyclelights

 

[Taffy13]

Depends on what you need bud, I'm doing something similar and am using moped/ motorcycle 12v lights but the wiring for that kinda stuff isn't plug and play. You would need to do a bit of wiring.

 

[Bikeguy Joe]

just don't try to power anything with the white wire....

 

[Loop]

I use a usb power bank, it supplies power to my taillight and brake lights and for the from I have a little bike headlight from amazon that I refit to use a large 4volt cob style led and is still driven off the board that came with the light.

 

[Loop]

The power bank is one of the boxy diy kits from wish or AliExpress because it doesn’t auto sleep if under a low drain (from the taillight whic is on soon as you plug the rear lights in)