So let me get this straight...

GoldenMotor.com

NerpAngel

New Member
Sep 28, 2009
141
0
0
Ellensburg,WA
the current temp ISSSSSS 50 degrees F

EDIT: btw how much fuel is supposed to flow into the carb when i have the valve open? Because maybe my engine isn't getting enough fuel? I mean it comes out pretty smooth, not gushing but not dribbling. I swear it's got to be my carb... :/
 
Last edited:

2door

Moderator
Staff member
Sep 15, 2008
16,302
175
63
Littleton, Colorado
If the fuel is flowing a steady stream...its enough, believe me. These little engines only require a very very small amount of fuel. Look at the milage they're capable of. It is a common misconception that you need a gusher from the tank to run the engine. It shouldn't drip; that can be an indication of a non venting tank but a steady flow no matter the size is sufficient.
We've established that you have fuel, fire and air. Your engine should start. Here is a suggestion: Pick up a can of quick start fluid (ether) Available at most auto parts stores in aerosol cans. Spray just a squirt into the air cleaner and try to start it again. I'm thinking you might just have a cold natured engine, I have one, that in cooler temperatures requires a little extra boost to start. Get back to us, Nerp. We're going to get that thing running or else...
Tom
 
Last edited:

NerpAngel

New Member
Sep 28, 2009
141
0
0
Ellensburg,WA
ok two things :)
One: How did we establish i have air again? I might have to check that one more time....
Two: You are talking to a very frustrated and sad little noob so I don't know what the "air cleaner" is :D

EDIT: Do you think my engine's "flooded" by now?.....
 
Last edited:

NerpAngel

New Member
Sep 28, 2009
141
0
0
Ellensburg,WA
OMG IT STARTED!!@!! it dies when i pull in the clutch lever to idle.... any way around this?!? HELP!!@! I hate it dying without me pushing the kill switch.
 

2door

Moderator
Staff member
Sep 15, 2008
16,302
175
63
Littleton, Colorado
:) Nerp, Congratulations. We were all pulling for you, sir. Enjoy, ride careful and have fun. We're always here if you need more help.
Tom
 

BarelyAWake

New Member
Jul 21, 2009
7,194
21
0
Maine
This thread was awesome to watch!

Not the suffering of Nerp ofc - but the efforts of all, together trying to remotely diagnose a first build to help a newb get ridin'!

Call me a sentimentalist but the the following gave me the biggest grin;

I did :) Wow.. I"M FINALLY RIDING!@#@!!@!
You go NerpAngel! Post bike pics when ya get a chance :D
 

NerpAngel

New Member
Sep 28, 2009
141
0
0
Ellensburg,WA
I seriously just want to thank you all :) haha. Like i mentioned, i've had this kit for about a week and 3 days and only just yesterday did I see it take it's first breath. I'm so excited!@
Off to ride and have fun :) I'll post pics as soon as i ride today!!!
Check back in for them.

EDIT: Mind you my bike isn't the best build and looks like a noob got a hold of it :D haha but it still WORKS!
 
Last edited: