I have a SkyHawk 66/80cc engine on my bike that normally runs great, I had an issue the other day with the chain binding itself around the drive sprocket causing the bike to stall. After fixing the chain I went to start it up and it wont go. I will pedal and release the clutch and not much happens, the motor sounds like it is turning over once every 60-70ft. Oddly though if I pedal slowly it turns over a bit faster, but still does not fire.
I checked the keys on the sprockets they are still intact, the clutch is engaging, the pads seems to be okay. Were should I look next?
I checked the keys on the sprockets they are still intact, the clutch is engaging, the pads seems to be okay. Were should I look next?