Me and my brother have been working on my bike and we are totally stumped at getting the rear sprocket to properly line up. First we went back and forth on which way the dished sprocket should go on. We decided that every grainy picture that we saw on the internet showed the teeth dishing towards the wheel. We tightened it up real good and heard a strange clicking noise. We found that the chain was rubbing against the spokes. So we thought the obvious answer was to reverse the sprocket and have the teeth leaning away from the wheel. Now we are off a good 1/4" or more causing a click as the teeth try to mesh with the chain. I believe that this is a 415 chain since it is much heavier and bigger than the chain that is on my bike.
Here is my question.....
Which way should sprocket go? Is there a definite way or is it just what works? And what methods should I use to get this aligned? Thanks for listening.
Here is my question.....
Which way should sprocket go? Is there a definite way or is it just what works? And what methods should I use to get this aligned? Thanks for listening.