My 79cc build- Felt Yellow Jacket

I had to ask my pal Sheldon Brown what a floating disc brake was, and yes, you should get that! Your plan to go thru motors as needed seems like a good one to me. 120cc? You better talk to Scotto!lol

I'm planning a quick 2stroke walmart build just to have a bike around to sell, and by next xmas hope to be finished with a 5hp Tecumseh fat bike for the mountains. (I started a thread- Tecumseh mental build, I think. Could use your help...)

I'm moving Sunday- may not be online for awhile. I rented a room in a house full of college girls in a local neighborhood that reminds me of the Santa Teresa area, with less trees. The ad had pics of the unused 2 car garage, so I asked to rent it as well, and they could care less- nobody uses it. Seriously?! Well, that's my new shop. This area has a million lawn mowers that need tune ups and blade sharpening, lot's of gas-bike exposure... Ocho, I might make some money this summer man. :)
 
Yes but there a bit pricey, so I'm waiting on the next paycheck. And I'm gonna see how long this 99cc lasts, I feel like its gonna be a while lol

I have been reading that thread, it does sound like a mental build haha

And college girls! Oh man, you could be getting a whole lot besides money, if you know what I mean *wink wink* .mbv.
 
Look at who finally reached their lucky number.

I also recently upgraded the front rotor to a 203 floating rotor and replaced the brake pads
along with a fresh oil change and wash down of the bike, ill upload more pics later.
 

Attachments

  • IMG949.jpg
    IMG949.jpg
    838 KB · Views: 259
Some more pics, finally got a inframe gas tank. Clutch also need to be replaced soon.
 

Attachments

  • IMG1046.jpg
    IMG1046.jpg
    770.1 KB · Views: 367
  • IMG1047.jpg
    IMG1047.jpg
    837.1 KB · Views: 332
  • IMG1048.jpg
    IMG1048.jpg
    862.5 KB · Views: 338
  • IMG1049.jpg
    IMG1049.jpg
    851.7 KB · Views: 273
Hello Ocho,
I'm very interested in mounting this engine at such an angle? Are you able to use more oil at this angle and how do you check the oil level?
Tanks
Barry
 
It's a good clutch, but for the cost of it I think it should of lasted longer than it did. The clutch pucks get stuck sometimes so that the clutch doesnt disengage and the pins on the clutch disk get worn out and start to slide out.
I'm gonna have to buy a cheap clutch in the mean time.

The engine works fine , but you need to add more oil... Something like 8 ounces I forget
 
ocho ninja said:
Yea it's hard to beat the quality of felts bikes, plus I love that fact that it runs a 1 1/8 head set.

Btw scotto do you were to get good intake manifolds for the engine?
I already have the side that meets the carb.
Click to expand...

Sorry to get back to you so late on your question here but I just stumbled upon this post 2 minutes ago.

I bought the intake manifold kit from AGK and brazed it for my 99cc pred build. The 79cc pred I built for my son was the AGK intake manifold that I won at the races.

The manifold works great and is a must for adding an aftermarket carb.
 
I recently purchased a 79cc predator on sale for $99.99 and I had a 25% off coupon too. For $81 and change and I have it on a shelf waiting for a bike to put it in. I'll be watching your build with interest.
The engines are still on sale and I have another coupon! I think I have a sickness...lol
 
My build has been done, been riding it for about a year now. Switched from a 79cc to 99cc a couple weeks after I finished building it.
 
Thanks scotto.
I was thinking a max torque clutch but after seeing one on my friends bike I didn't like the chatter and the way it engaged
For now I have to manually disengage the pucks on the cheetah at every stop if I rev my bike past ~5k
Until I save up for another or maybe look at other clutch options.
 
ocho ninja said:
Thanks scotto.
I was thinking a max torque clutch but after seeing one on my friends bike I didn't like the chatter and the way it engaged
For now I have to manually disengage the pucks on the cheetah at every stop if I rev my bike past ~5k
Until I save up for another or maybe look at other clutch options.
Click to expand...

You might want to check out the "Dragon Skins" clutches, AGK has had good luck with them on this size engine. Just a thought.
 
I have only heard good things about the cheetah clutches...what are your major issues with the clutch ocho?

I have also heard negative things about the chatter on the max torque....

I am now starting to rethink my choice of clutches....is the cheetah the best application for me if I'm just building a cruiser?? Hmmm.....
 
You must log in or register to reply here.
Back
Top