Looking for a little help on my current build

desolation

desolation

Member
here is the bike im working with. was given to me a few years ago.

34948_1457786039456_1077534496_31371678_1605009_a.jpg



main thing is where to mount the motor and how to mount the sprocket to the rear wheel. my first motorized bike project turned out well and im quite happy with it. now id like to try and do something a little harder.

im just stuck on what to do from here id like to keep the bike in the condition it is, without having to make any heavy mods to it.
 
desolation said:
here is the bike im working with. was given to me a few years ago.
main thing is where to mount the motor and how to mount the sprocket to the rear wheel. my first motorized bike project turned out well and im quite happy with it. now id like to try and do something a little harder.
im just stuck on what to do from here id like to keep the bike in the condition it is, without having to make any heavy mods to it.
Click to expand...

I see only two options with that frame. 1) front engine mount...no front sprocket (roller drive)
http://www.ebay.com/itm/250766405363?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
or 2) rear engine mount (rack), either a roller drive or chain/belt drive.
 
Last edited:
well ok then!
sounds like you already had a plan.
We would like to see pics and a report when you are done.
rc
 
i do kinda have a plan but im not to sure if its gonna work. and wanted to get a little input from a few of you that have been at this longer than me.
 
Honestly I think there's really no practical way to mount a China motor to the frame without modding the frame. Really you might be better off trading for a different bike, unless your fabricating skills are of a Journeyman level.

I wouldn't attempt it but that's just me :p
 
You must log in or register to reply here.
Back
Top