How do i mod this type of pipe baffle?.

Markpee

New Member
Feb 10, 2008
1
0
0
It has 2 round metal parts on both ends one going into the engine and one coming out. and in the middle it has a thin tube thats dented in the middle and is full of holes.


Soo i gess like this -0==0


 

RedB66

Active Member
Dec 28, 2007
1,023
14
38
Sunshine State
There are a couple different ways to modify your pipe. You can drill more holes in the small part of the tube or you can cut off one end of the baffle. Keep in mind that these changes will increase the loudness of the motor. If you dont mind.....Please introduce yourself....not required, just like to know who you are and where your from.....Thank You, Redb66.
 

paul

Well-Known Member
Dec 23, 2007
5,548
39
48
64
Kalamazoo, MI
i have the same pipe and drilled some holes in it. didn't do anything but make the pipe a little louder. i have talked to others that have drilled out the other style pipe also and most said no real noticable difference except the noise
 

jezusjonz

New Member
Feb 26, 2008
192
0
0
Indiana
I made a baffle ejector the other day that I can kick it in and out about an 1 or so...and drilled a few extra holes in the top cap and found no noticeable difference other than I can control when its loud and when its not and ......it looks kinda cool....
Terry
 

Easy Rider

Santa Cruz Scooter Works
Jan 15, 2008
2,144
6
38
Nor*Cal
I found that using a 3M green srrubbing pad works great in lowering your db levels. Plus its works better than fiberglass.