Hello

[josh barksdale]

My name is Josh. Icve been riding gas bike's for a year now. Trying my hardest to learn the way's and not lose my patience. Lol easier said then done. I have a motor mount issue I have a question on. I've been trying to find a rear mount for my bike for the ladt couple months. It seems I either dont know what I'm looking for or I have an idea. Would a m6 hex bolt do the trick for a rear mount. I've been looking for a whole set up and that seem's impossible. Any advice is good advice. I got pic's and what have you to better understand my issue. Anyway's glad to be here. Josh in Cali.

 

[Greg58]

Welcome Josh, if you can post pictures I'm sure someone can help.

 

[josh barksdale]

Thanks for the reply. So as you can see my studs in the rear mount came loose. I lost one stud. And the back U bracket hokding the motor in place.

 

[Greg58]

You'll need to make sure the other stud didn't break off in the engine, if not you can use 6mm bolts, you can buy a replacement strap on eBay. Be sure to use removable loctite on all mounting bolts.

 

[josh barksdale]

Thanks yes I know better now lol. Will go by the hardware shops tommorow and hope to get lucky on some bolts. Again thanks.

 

[Greg58]

You can get the strap from eBay for less than $10, measure the width of the bolt holes and search " motorized bicycle rear engine mount".

 

[josh barksdale]

Sweet bracket should be on it's way. I appreciate the feedback.