hello from anchorage, ak

B

bushido1287

New Member
im new to the motorized bicycle scene and have a few questions. first, what company is the best and most reliable to buy from? second, what is the largest motor kit i can buy? im a big guy and need somthing with a high amount of torque and horse power to get me going at +40 mph. third, which is better, a dry roller or drive chain? i also want to do some basic mods like porting, air intake, small amount of aerodynamic work, ect. anything to get going faster.
one big problem i have noticed is the amount of these motors are coming from
china, are there any american made kits?
thankyou in advance
 
Well, I gotta warn ya that you've set yer sights a lil high lol - there's no "kit" engine that'll getcha 40+ particularly if yer a "big guy" - pretty much all the kits, 2 and 4 stroke will do about thirty out of the box... some less. Unfortunately there's no american made kits either.

There is however the Morini which is a quality engine with pretty much the highest power to weight of the engines available - you can check 'em out and the bikes ppl have built here: Morini Motors BUT they are not a kit and can be a challenge. If this is your first build you may wish to consider an inexpensive Chinese in-frame kit to learn with.

Later when you've sorted it out you can upgrade to a Morini using the accessories from the Chinese kit (throttle, tank, sprockets, etc)... Just a thought ;)
 
bushido1287 said:
im new to the motorized bicycle scene and have a few questions. first, what company is the best and most reliable to buy from?

< Just off the top of my head, I would say Pirate & Dax, but you really only have to look left and right here at the ads on this forum. I've ordered from most of them and can't think of any complaints. >

second, what is the largest motor kit i can buy? im a big guy and need somthing with a high amount of torque and horse power to get me going at +40 mph.

< I can only say, "That's a bit of a tall order there". >

third, which is better, a dry roller or drive chain? i also want to do some basic mods like porting, air intake, small amount of aerodynamic work, ect. anything to get going faster.

< I only know drive chains and they work well enough for me. Somebody with friction drive will have to chime in now. >

one big problem i have noticed is the amount of these motors are coming from
china, are there any american made kits?

< There ya got me. >
thankyou in advance
Click to expand...

< Hope I was able to help a little. >
 
You must log in or register to reply here.
Back
Top