MotoMagz
Well-Known Member
It’s metal with a outer shell of rubbery plastic that you have to slice open down the middle to remove.
Flex Pipe Exhaust
- Thread starter Hot Wheels
- Start date
MotoMagz
Well-Known Member
Yep that’s the stuff buddy! Also it’s sold with no wires the By the foot in some hardware stores.
breath_easy13
Active Member
Dang can you only buy 50ft rolls I need like 24 inches
Tony01
Well-Known Member
Looks like they sell the 3/4” stuff around $20 for 6ft. But do they have a 1” ID? 3/4” is a little small for a 212 but it will probably work and may even be a perfect fit on the stock muffler flange when you cut it off. I think my first 212 pipe was about a 3/4 or 7/8” ID and in fact sounded better than the freer flowing larger diameter pipe. But I made the new one and gave the old one to a guy with an older 212 with smaller valves so it worked out great.
breath_easy13
Active Member
nice, im just going to bring my exhaust flange to the lows and home depot and see what fits. I think there, they literally have rolls you can pick the length and cutt
Found this? ...........Curt
https://www.google.com/search?rlz=1.....0.2..0.0.0.......0......gws-wiz.kjHL8wfksMY
https://www.google.com/search?rlz=1.....0.2..0.0.0.......0......gws-wiz.kjHL8wfksMY
breath_easy13
Active Member
are
you talking about the walker galvanized flex tube ? yeah ive seen it, but i have a feeling it might sound a bit brappppy for my taste, i think the electrical canduit with the rubber coating would minimize the brappy echo sound. could be wrong though
That come out wrong, do search for 1" stainless flex tube. ) or 7/8". but i think you need to cut the rubber coating off the conduit pipe also............Curt
Found this Master Carr...........Curt
https://www.mcmaster.com/5241k13
Found this Master Carr...........Curt
https://www.mcmaster.com/5241k13
Last edited:
breath_easy13
Active Member
did you cutt the rubber coating off ? or just wrap it with exhaust tape ?
Tony01
Well-Known Member
No I’m talking solid pipes. I actually gave up on the search for that flex tubing a long time ago. I ran the crappy copper stuff and it broke fast. I think that stuff Curt linked could be it...
breath_easy13
Active Member
did the copper stuff sound brappy ? Would the rubber coating minimize the brap sound ?
MotoMagz
Well-Known Member
I have used this guy too.. just ask for the length you need. Tony is right it’s snug fit. Guy did have 1” before? https://www.ebay.com/itm/FLEX-TUBIN...133197?hash=item1a3be6d4cd:g:5Q4AAOSwJcZWcEWA