Hello everyone. Im new here. My name is Denny and I live in the Pittsburgh Pa area. I received my first engine yesterday and spent the night trying to figure it out since it didnt come with any instructions. The company I got it from gave me their instructions via online download but they were extremely limited. They called it an 80cc but said it is actually a 66cc if that helps describe what motor i have. It took me about 4 hours to get it all together. I mixed the gas and oil and peddled about 20 feet and let off the clutch and it started right up. I took it about a half mile and it stalled. I then realized that the choke was on the whole time. I obviously dont know much about these and should have got help. I peddled the bike back home and cleaned the carb and attempted to start it again. It sounds like it wants to start then I get the occasional POP noise. It just wont start. The spark plug gap is .020. I cleaned that as well. Ive read through some other threads and dont really understand some of what Im reading. I saw something about a CDI. I dont know what that is. Also I saw something about disconnecting the kill switch. I dont want to do anything else until I hear from someone on here. I dont want to make it any worse. Also. there is a screw with a spring on the carb. I was told by a neighbor that it is a fuel/ air adjustment. Any advise on adjusting that?
Thank you
Denny
Thank you
Denny