been tinkering with the engine i managed to do a sound file tonight let me know how it sounds. It has about 500 miles on the engine was on a straight away managed to do 30ish in 50 degree weather on a 48t sprocket on the second to top setting in the jet pin (5 slot) with a B6HS spark plug. On 74:1 opti-2 (one package of oil to 1 gallon of gas. Have the original metal gasket still. i do see that around the cylinder edges it is slightly bent and charred not sure if that matters.
Link is about 9 1/2 min you can skip to 8:15 min mark to my concern on the engine. it sputters a little and feels like it goes in and out acceleration wise wheel is straight and without the rail on the frame (the plastic pulley type thing in the kit)
i am going to be getting a 26" 12 guage bike wheel free wondering if it would help not breaking spokes from the stress on the spokes from the original nylon adapter from the kit getting chewed up
Any suggestions would be helpful
Link is about 9 1/2 min you can skip to 8:15 min mark to my concern on the engine. it sputters a little and feels like it goes in and out acceleration wise wheel is straight and without the rail on the frame (the plastic pulley type thing in the kit)
i am going to be getting a 26" 12 guage bike wheel free wondering if it would help not breaking spokes from the stress on the spokes from the original nylon adapter from the kit getting chewed up
Any suggestions would be helpful