crank question

B

bodydropped

New Member
alright i need a quick tip on removing the crank from the casing.i have the block apart and would like to have the crank out to take it to my machine shop to get a quote on a balance.
im stumped on this one thanks for any info you can provide ......dnut

oh and if there is a better quality rod and piston avaliable let me know i cant find a thing.
 
Last edited:
If you have everything removed...MAG magnet, small crank gear, and all case screws...just tap it apart with a plastic deadblow hammer. The bearings are not a press fit to the crank.

If you have not removed the clutch assembly...you will need to! There are 3 case screws behind the clutch assembly.

Jim
 
yeah the motor is apart and i tried tapping the shaft with the small gear on the clutch side and no movement at all. it seems like there is something clipped in side or maybe a pin of some sort.
 
yup thats where im at,but i dont see anything about removing the crank only the clutch shaft.so i guess i do have to hammer it out.
 
You must log in or register to reply here.
Back
Top