mazdaflyer
New Member
Hopefully the link below shows my 49 Schwinn fitted with a 80cc RAW Motors engine fron Zone 8 Cycling. It has a custom mounting bracket fabricated from a Simpson framing tee, rubber flooring pads and SS U-bolts. I changed the original skip tooth hub and sprocket for a Bendix rear coaster hub which provided clearance for the rear drive gear and brake arm. The original Schwinn crank had to be changed to new wider spread crank providing motor clearance for pedaling. I also added a wire pull from the choke to the top tube that doesn't show up in the photo. I plan on adding a drum brake to the front wheel for better braking. Will probably leave the bike in rust and faded paint as a rat rod.
I haven't got the idle quite adjusted and acutally lost the idle screw on a test run.

I haven't got the idle quite adjusted and acutally lost the idle screw on a test run.



Last edited: