4 Stroke engine muffler issue.

Discussion in '4 Stroke Bicycle Engines & Kits' started by SpeedingTurtle, Mar 9, 2019.

  1. SpeedingTurtle

    Joined:
    Aug 14, 2016
    Messages:
    58
    Likes Received:
    4
    So I'm trying to put the exhaust on and unlike the engines in many of the tutorials I see, there are these stock bolts that comes out. I'm not sure if I can remove them.

    [​IMG] [​IMG] [​IMG] [​IMG]


    Edit:

    HuaSheng 49cc 4 stroke engine
     
    Tom from Rubicon likes this.
  2. curtisfox

    curtisfox Well-Known Member

    Joined:
    Dec 29, 2008
    Messages:
    4,984
    Likes Received:
    1,281
    They are studs, you can double nut them and then they should come out. Jam one nut against the other so it will lock them on the stud, then turn them out, using inner nut...........Curt
     
  3. MotorBicycleRacing

    MotorBicycleRacing Well-Known Member

    Joined:
    Jul 28, 2010
    Messages:
    5,845
    Likes Received:
    105
    5mm studs or you can replace with allen heads.
    You could grip the unthreaded section with vice grips but double nutting is better.
     
    SpeedingTurtle likes this.
  4. SpeedingTurtle

    Joined:
    Aug 14, 2016
    Messages:
    58
    Likes Received:
    4
    The double nutting worked! Thanks guys!
     
    Tom from Rubicon likes this.

Share This Page