2007 schwinn whizzer

[2007 schwinn Whizzer]

I have a 2007 schwinn whizzer that needs a few things, i was wondering if anyone could recommend what type of carburetor i should use to replace the old one, and where i could find and matching idler pulley. Thank you.

 

[wrench]

If ya got a 2007 Whizzer engine then You'll want a 22mm carb
This carb says it's got a #100 main jet You'll want to use a #84 or #85

MAHJONG88 Bonus Slot New Member 100% Di Awal Dengan To 3x 7x Sampai 10x Sangat Mudah Dicapai

whizzercruzzerparts.com

 

[wrench]

I have a 2007 schwinn whizzer that needs a few things, i was wondering if anyone could recommend what type of carburetor i should use to replace the old one, and where i could find and matching idler pulley. Thank you.

Paul @ https://whizzercruzzerparts.com will have everything you need

 

[Tjpthompson]

Paul @ https://whizzercruzzerparts.com will have everything you need

Wrench (If you're still on here) or anyone, I have a 2007. whizzer Phantom II and have the same question about a carb. The site that is attached looks like it's gone. Do you have any suggestions about what/where to get one? Thanks for your help.

 

[insight3fl]

Wrench (If you're still on here) or anyone, I have a 2007. whizzer Phantom II and have the same question about a carb. The site that is attached looks like it's gone. Do you have any suggestions about what/where to get one? Thanks for your help.

Post is 2 years old. Paul passed away more than a year ago and the final sale of items took place earlier this year. Jo lin from Taiwan (E-Crater) still has many parts but shipping adds quite a bit to the price.

my ebay

 

[wrench]

Wrench (If you're still on here) or anyone, I have a 2007. whizzer Phantom II and have the same question about a carb. The site that is attached looks like it's gone. Do you have any suggestions about what/where to get one? Thanks for your help.

my ebay

WC1 Manufacture in Taiwan made your 2007 Whizzer
You can order from them but It's gonna take a while and cost more because it's shipped from Taiwan
You can also find a wide selection of 22mm carbs on E Bay and Amazon

Maybe try search Whizzer Parts on E Bay

 

[Tony01]

Wrench (If you're still on here) or anyone, I have a 2007. whizzer Phantom II and have the same question about a carb. The site that is attached looks like it's gone. Do you have any suggestions about what/where to get one? Thanks for your help.

22mm may be the size the rest are but that’s way too big for that size motor. I’d go 19mm MAX. I think about 16-18mm is best. Far as which exact carb that’s up to your intake manifold bolt spacing and such. Pretty much you need a 19mm slide carb with the correct bolt spacing. Measure the original carb or intake and get the same.

 

[Tjpthompson]

Thanks guys. I will try and see what I can find.

 

[Tjpthompson]

I'm seeing several that say for 2000-2005 Whizzer. Is there a difference on my 2007? Sorry I just want to be sure. Thanks again for your help.

 

[wrench]

I'm seeing several that say for 2000-2005 Whizzer. Is there a difference on my 2007? Sorry I just want to be sure. Thanks again for your help.

NE-5 2005-2007 has a bigger intake valve 24mm and came stock with a copy keihin 22mm carb
1999-2004 has a 22mm intake valve and first came out with a really good Honda 16mm carb then switched to a copy kehin 19mm carb

The 22mm carb will probably come with a big jet, use a #84 or #85

PZ 20mm carb is also a good choice as that's what Cruzzer used on their Version of the NE-5